Blue House BH016AN Elektrikli Süpürge

                           1.Press the ON/OFF button to switch the                                                                                    2.Changing and Cleaning filter
                             appliance on.                              2. Take out the dustcup.                                                      • Filter should be cleaned at least twice a 
                                                                                                                                                        year or when it becomes visible solid.
                           2. To rewind the power cable, press the                                                                                    • Always operate the cleaner with filter 
                             rewind button with one hand and guide               2                                                                      installed.
                             the cable with the other hand to ensure                                                                                  • Otherwise, reduced suction or motor 
                             that it does not whip causing damage.                                                                                      damage may be result.
                                                                                                                                                      • Disconnect from electrical outlet, before 
                           MAINTENANCE                                                                                                                  cleaning filter.
                           1.5pilling rubbish from the dust                                                                                           • Do not use a washing machine to rinse 
                             compartment subassembly                                                                                                    filter.
                           • Always operate the cleaner with the dust                                                                                 • Do not use hair drier to dry it.
                             compartment subassembly 
                             whole installed.
                           • The dust container must be emptied if the 
                             window of the filter indicator turns fully 3. Press the lock of dustcup's lower cover.
                             red when the cleaner is operating at 
                             maximum power and the nozzle is raised                                                                              Sünger    Sünger Tutacağı
                             from the floor.


                           1. After removing the flexible tube, handhold 
                             handle and press the locking button.









                                                                        4. Carry away the dust-glass cap and Spill 
                                                                          rubbish
                                                                        5. Replace the dust compartment 
                                                                          subassembly until it is locked.








15






























                                                                                 1. Pull dustcup upward
                                                                                 2. Take out sponge assembly.
                                                                                 3. Take out the sponge from shelf
                                                                                 4. Rinse sponge and shelf in lukewarm water 
                                                                                   and dry them completely.
                                                                                 5. Put the sponge into the shelf and pull 
                                                                                   them back.


                                                                                 3. Changing the micro-exhaust filter






























                                                                                 1. Open the lid
                                                                                 2. Remove the used HEPA filter
                                                                                 3. Insert the clean HEPA filter
                                                                                 4. Close the lid










                                                                                                                                                                                                                                                                   18