Blue House BH 020 KM Elektrikli Süpürge
Vacuum Cleaner
Instruction Manual
General Safety Instructions:
• Read the operating instructions carefully before
putting the appliance into operation and keep
the instructions including the warranty, the
receipt and, if possible, the box with the internal
packing.
• The appliance is designed exclusively for private
use and for the envisaged purpose.
This appliance is not fit for commercial use. Do
not use it outdoors (except if it is designed to
be used outdoors). Keep it away from sources
of heat, direct sunlight, humidity (never dip it
into any liquid) and sharp edges. DO not use
the appliance with wet hands. If the appliance
is humid or wet, unplug it immediately. Do not
put it in water.
• When cleaning or putting it away, switch off
the appliance and always pull out the plug
from the socket (pull on the plug, not the cable)
if the appliance is not being used and remove
the attached accessories.
• DO not operate the machine without
supervision. If you should leave the workplace,
always switch the machine off or remove the
plug from the socket (pull the plug itself, not
the lead).
• To protect children from the dangers posed by
electrical appliances, make sure that the cable
is hanging low and that children do not have
access to the appliance.
• Check the appliance and the cable for damage
on a regular basis. DO not use the appliance if
it is damaged.
9
DO not try to repair the appliance on your Own.
Always contact an authorized technician. To
avoid the exposure to danger, always have a
faulty cable be replaced only by the
manufacturer, by our customer service or by a
qualified person and with a cable of the same
type.
• Use only original spare parts.
• Pay careful attention to the following "Special
Safety Instructions".
Special Safety Instructions
• DO not suck up liquids!
• Do not suck up hot ashes or pointed or sharp
objects!
• Do not use the appliance in humid rooms!
• Never use without the filter. Check that the
filter is inserted correctly!
• Hair, clothing and body parts away from the
vacuum nozzle during use!
• Keep the vacuum cleaner away from sources
Of heat like radiators, ovens, etc.!
Start-up
• Insert the connection head Of the suction hose
into the hose connector (10) until it locks in
place. To do so, please press the buttons
simultaneously. In Order to release the hose
again, please press the buttons once more on
the connection head.
• Keep the buttons pressed down and then pull
out the hose.
• Please attach the telescopic suction tube to the
grip end (see section " Suction Tube
• Then assemble the floor nozzle and/or the
accessories.
Cable winding device:
pull out the cable up to the maximum length
indicated with the yellow mark.
Never pull the cable out up to the red mark as
the cable winding can be damaged.
Said damages are not covered by the warranty.
Winding:
press the cable (5) winding button and guide the
cable. Hold the cable to avoid wrapping.
Nozzle Attachment:
Crevice nozzle/
Brush nozzle: For vacuuming upholstery, curtains
and in corners and crevices etc.
"2-in-l" nozzle: When this is folded together it
can be used as a groove nozzle. If you would like
to use the brush nozzle, pull the brush section in
the direction of
the arrow until it locks in place.
Floor nozzle: To clean carpets or smooth surfaces.
Smooth floors: press down the lever with the
brush symbol with your foot. The brush is
now visible.
Carpets: Press down the opposite lever.
Releasing the nozzles: pull these off while turning
slightly.
Air Slide:
Open the air slide on the hose handle in order
to regulate the airflow or to clear any articles
sticking to the nozzle.
Using the Appliance
1. Unwind the length of cable you require.
2. Insert the mains plug into a correct socket.
Turn on the device with the on/off switch (1)
by pushing it downwards.
3. Adjust the suction power by turning the suction
power regulator (6).
4. Vacuum at a steady speed. There is no need to
exert pressure.
5. Attention: pay attention to the range that can
be covered with the cable length.
Vacuum power regulator
Low vacuum power: For curtains and delicate
fabrics
Medium vacuum power: For long-pile carpets
and textile flooring
High vacuum power: For sturdy rugs and floors
Telescopic Suction Tube:
1. This makes it possible to adapt the height to
your individual body size. Unlock the coupling
by turning the wide section Of the suction tube
to the left.
2. Move the suction tube as required. TO lock the
coupling, turn the wide suction tube to the
right.GB
Accessories: 2-in-l nozzle(groove and brush
nozzle)
Dust bag replacement display (7):
Hold the hose up into air. If the dust bag change
display lights up, the bag is full. please change
it.
Changing the dust bag:
• Pull the plug out of the socket.
• Open the lid of the dust bag compartment by
the handle (8) (until its locks in place).
• Remove the bag by pulling the fixing device
carefully towards the rear in order to make the
bag more easily accessible. Then remove the
dust bag by pulling it upwards.
• Insert a new bag. Please ensure that the bag is
located correctly in the guide
Filter:
Your appliance has two filters.
Inlet filter (Motor protection filter):
The inlet filter is located in the dust bag
compartment. The filter is located vertically in
the rear section of the dust housing. Remove the
filter by pulling upwards. Clean the engine
protection filter after dust bag changes. If
necessary, the filter can also be washed in warm
water without any additives. place it back into
place only once it is completely dry!
Outlet filter:
The appliance is also equipped with an outlet
filter. This filter is to be found on the side of your
device behind the ventilation grille.
Open the ventilation grille by turning the filter
cover
Then pull the grille Out towards the front. Remove
the filter and clean as described above. Please
reinsert the filter correctly and then close the
ventilation grille.
Cleaning:
• pull the plug Out Of the socket before cleaning!
• Clean the casing with a dry cloth.
Storage:
• Let the iron cool down completely.
• Wind the cable completely.
• Position the device either horizontally or
vertically in order to suspend the hook
on the floor nozzle in the parking assistance on
the rear Or the bottom of the device.
This device has been tested according to all
relevant current CE guidelines,
such as electromagnetic compatibility and low
voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
10