Blue House BH 020 KD Elektrikli Süpürge

 
Vacuum Cleaner 
Instruction Manual 
General Safety Instructions: 
• Read the operating instructions carefully before 
putting the appliance into operation and keep 
the instructions including the warranty, the 
receipt and, if possible, the box with the internal 
packing. 
• The appliance is designed exclusively for private 
use and for the envisaged purpose. 
This appliance is not fit for commercial use. Do 
not use it outdoors (except if it is designed to 
be used outdoors). Keep it away from sources 
of heat, direct sunlight, humidity (never dip it 
into any liquid) and sharp edges. DO not use 
the appliance with wet hands. If the appliance 
is humid or wet, unplug it immediately. Do not 
put it in water. 
• When cleaning or putting it away, switch Off 
the appliance and always pull out the plug 
from the socket (pull on the plug, not the cable) 
if the appliance is not being used and remove 
the attached accessories. 
• DO not operate the machine without 
supervision. If you should leave the workplace, 
always switch the machine off or remove the 
plug from the socket (pull the plug itself, not 
the lead). 
• To protect children from the dangers posed by 
electrical appliances, make sure that the cable 
is hanging low and that children do not have 
access to the appliance. 
• Check the appliance and the cable for damage 
on a regular basis. DO not use the appliance if 
it is damaged. 

DO not try to repair the appliance on your Own. 
Always contact an authorized technician. To 
avoid the exposure to danger, always have a 
faulty cable be replaced Only by the 
manufacturer, by our customer service or by a 
qualified person and with a cable of the same 
type. 
• Use only original spare parts. 
• Pay careful attention to the following "Special 
Safety Instructions". 
Special Safety Instructions 
• Do not suck up liquids! 
• Do not suck up hot ashes or pointed or sharp 
objects! 
• Do not use the appliance in humid rooms! 
• Never use without the filter. Check that the 
filter is inserted correctly! 
• Hair, clothing and body parts away from the 
vacuum nozzle during use! 
• Keep the vacuum cleaner away from sources 
Of heat like radiators, ovens, etc.! 
Start-up 
• Insert the connection head Of the suction hose 
into the hose connector (10) until it locks in 
place. To do so, please press the buttons 
simultaneously. In Order to release the hose 
again, please press the buttons once more on 
the connection head. 
• Keep the buttons pressed down and then pull 
out the hose. 
• Please attach the telescopic suction tube to the 
grip end (see section " Suction Tube 
• Then assemble the floor nozzle and/or the 
accessories. 
Cable winding device: 
pull out the cable up to the maximum length 
indicated with the yellow mark. 
Never pull the cable out up to the red mark as 
the cable winding can be damaged. 
Said damages are not covered by the warranty. 
Winding: 
Press the cable (5) winding button and guide the 
cable. Hold the cable to avoid wrapping. 
Nozzle Attachment: 
Crevice nozzle/ 
Brush nozzle: For vacuuming upholstery, curtains 
and in corners and crevices etc. 
"2-in-l" nozzle: When this is folded together it 
can be used as a groove nozzle. If you would like 
to use the brush nozzle, pull the brush section in 
the direction of 
the arrow until it locks in place. 
Floor nozzle: To clean carpets or smooth surfaces. 
Smooth floors: press down the lever with the 
brush symbol with your foot. The brush is 
now visible. 
Carpets: Press down the opposite lever. 
Releasing the nozzles: pull these off while turning 
slightly. 
Air Slide: 
Open the air slide on the hose handle in order 
to regulate the airflow or to clear any articles 
sticking to the nozzle. 

Using the Appliance 
1. Unwind the length of cable you require. 
2. Insert the mains plug into a correct socket. 
Turn on the device with the on/off switch (1) 
by pushing it downwards. 
3. Adjust the suction power by turning the suction 
power regulator (6). 
4. Vacuum at a steady speed. There is no need to 
exert pressure. 
5. Attention: pay attention to the range that can 
be covered with the cable length. 
Vacuum power regulator 
Low vacuum power: For curtains and delicate 
fabrics 
Medium vacuum power: For long-pile carpets 
and textile flooring 
High vacuum power: For sturdy rugs and floors 
Telescopic Suction Tube: 
1. This makes it possible to adapt the height to 
your individual body size. Unlock the coupling 
by turning the wide section of the suction tube 
to the left. 
2. Move the suction tube as required. TO lock the 
coupling, turn the wide suction tube to the 
right.GB 
Accessories: 2-in-l nozzle(groove and brush 
nozzle) 
Dust bag replacement display (7): 
Hold the hose up into air. If the dust bag change 
display lights up, the bag is full. please change 
it. 
Changing the dust bag: 
• Pull the plug out of the socket. 
• Open the lid of the dust bag compartment by 
the handle (8) (until its locks in place). 
• Remove the bag by pulling the fixing device 
carefully towards the rear in order to make the 
bag more easily accessible. Then remove the 
dust bag by pulling it upwards. 
• Insert a new bag. Please ensure that the bag is 
located correctly in the guide 
Filter: 
Your appliance has two filters. 
Inlet filter (Motor protection filter): 
The inlet filter is located in the dust bag 
compartment. The filter is located vertically in 
the rear section of the dust housing. Remove the 
filter by pulling upwards. Clean the engine 
protection filter after dust bag changes. If 
necessary, the filter can also be washed in warm 
water without any additives. place it back into 
place only once it is completely dry! 

Outlet filter: 
The appliance is also equipped with an outlet 
filter. This filter is to be found on the side of your 
device behind the ventilation grille. 
Open the ventilation grille by turning the filter 
cover 
Then pull the grille Out towards the front. Remove 
the filter and clean as described above. Please 
reinsert the filter correctly and then close the 
ventilation grille. 
Cleaning: 
• pull the plug Out Of the socket before cleaning! 
• Clean the casing with a dry cloth. 
Storage: 
• Let the iron cool down completely. 
• Wind the cable completely. 
• Position the device either horizontally or 
vertically in order to suspend the hook 
on the floor nozzle in the parking assistance on 
the rear Or the bottom of the device. 
This device has been tested according to all 
relevant current CE guidelines, 
such as electromagnetic compatibility and low 
voltage directives, and has been constructed in 
accordance with the latest safety regulations. 
Subject to technical changes without prior notice! 

9 

10