Blue House BH 007 MMP Elektrikli Süpürge

 
IMPORTANT SAFEGUARDS 
• The below listed items shall not be 
vacuumed; otherwise the appliance may 
be damaged: 
A. Wet surfaces, water or any other 
liquid 
B. Live cigarette, paper or ash 
C. Sharp objects like needle 
D. Any flammable or volatile materials, 
benzene, dye etc. 
• Always unplug when cleaning, checking, 
repairing etc. services are being given. 
Never off the appliance by directly 
unplugging from the electrical outlet. 
Do not expose the appliance to direct 
sunlight or do not place next to a heat 
source or similar to avoid deformation of 
plastic components or to prevent fire 
accident. 
Do not operate the appliance for extended 
periods when inlet is blocked to avoid 
deformation of plastic components or 
damaging the engine. 
Do not operate the appliance in extremely 
dusty environments. 
• Clean the outer surface with a soft cloth 
and soft detergent. Hard or abrasive 
detergents Will damage the surface. 
Do not harshly bend or pull the hose to 
avoid the damage. 
Do not try to repair, adjust or replace the 
vacuum cleaner parts. When broke down, 
contact to an authorized service for 
examining, repair or electrical/mechanic 
adjustment. 
• Ensure that the bag is placed correctly 
before first use. 
Trouble Shooting 
In some cases you may overcome the problem without 
service support if you view the following table 

• Pure dust vacuum may result in blockade 
of the bag holes. Replace the bag in such 
occurrence even the bag is not filled. 
Do not use the appliance without motor 
protection filter to prevent the damage. 
OPERATION 
1. As Standing (Vertical) Vacuum Cleaner 
* Before operating the vacuum cleaner 
ensure that the filter is in its place in the 
dust bag, all the parts are inserted and 
interacting and power button is OFF 
Take the handle. Press the separating 
button and install the handle to the main 
body. Then leave the button and turn 
the handle till a click sound is heard. 
plug in 
• Open the button 
CAUTION: Attention that the cord is not pinned 
to our foot or to other objects 
• Floor attachment should be moved 
upwards downwards to clean the floor. 
CAUTION: Do not press the floor attachment 
firmly and do not move to sides, it may damage 
the floor. 
Turn off the button and unplug after use. 
Remedy 
Plug properly, check the 
electricity, check the power 
button 
Take off the blocking dusts , 
empty the dust bag and clean 
the filter 

Cleaning the Vacuum Cleaner 
Cleaning the vacuum cleaner on time. Otherwise 
the engine may be damaged and vacuum power 
may decrease. 
Press upper function button to remove 
the dust bag 
Hold the handle of the filter and pull it 
• Empty the dust bag 
Remove the dusts in the filter 
MAINTENANCE 
Main body and handle may be washed with a 
soft cloth and water. Dust bag and floor 
attachment may be washed with water. 
Never clean your vacuum cleaner with alcohol 
or benzene. 
Filter: Do not wash the filter in the washing 
machine. If very dirty and IOW suction (vacuum 
power) you should clean the dust layer, wash 
with water and thoroughly dry. 

problem 
Engine 
not works 
Weak Suction 
(Vacuum) 

Possible Cause 
Improper pluggin, electricity cut, 
power button is off 
Air inlet, dust bag or filter may be 
blocked