PROBLEMS
WATER IS DRIPPING
AND STEAM IS EXITING
AROUND THE LID
VAPOR EXIT MUCH FROM
PRESSURE REGULATING
VALVE
THE LID IS NOT
OPENING
CONTINUOUS
STEAM EXITS
FROM TOP OF
THE LID AND ITS
HANDLE PARTS.
STEAM DOES NOT
EXIT FROM PRESSURE
REGULATING VALVE,
ALTHOUGH STEAM
EXITING FROM
PRESSURE SAFETY
SYSTEM STOPS.
REASONS
The lid is Closed properly,
Silicone main seal is not
installed correctly, it is dirty
or damaged, Stage pressure
adjust and safety
do not work, It can be damage
in the rims the pressure
Stove is opened excesgOe'y
or its pressure regulating is
incorrect
The lid due
the pressure ccNer begin to
boil While itg lid ig opened and
intensive vapor exits.
Heat input is not sufficient.
The amount Of liquid in the
pressure cooker is not enough.
Stage Pressure Regulating
Valve isin position. Silicon
main seal is damaged,
Stage Pressure
Valve is blCCked
34
Regulating
SOLUTIONS
Carefully turning the lid its
position. Clear the main seal
and refit the right position. If
damaged. replace "th original
replacement seal. Perform
cleaning and maintenance of
safety after at the er•d
of 2-3 cooking. Check th?
rims Of the pressure CCOker
to be clean and undamaged.
Keeping pregsure
uncter cold water and reduce
itg preggure Check Stage
Pressure Regulating Vatve,
safety the main seal
the lid.
Please check pressure
regulating position, Is it at the
appropriate level? Reduce the
heat of the stcwe
the Stove, Wait for
boiling to stop in the pressure
cooker _ Yau Can the lid
when boding stops.
Increase the flame. nit at beast
I Cup Water or liquid. Take
the pressure position to I or 2.
Replace With a seal. _
Turn off the heat input. Leave
you' pressure
Open the lid after it has
cooled complete* and 100k
at whether Stage Pressure
Regulating Valve is blocked.
Clean the Stage Pressure
Regulating Valve and the
pressure safety valve.