ATS1197
ATS Smart Card Reader with keypad
Specifications Multiple Card Badging
Supply voltage 8.5 - 14 VDC The ATS1197 can be used for
Current consumption 40 - 110 mA arming/disarming areas as well as for
Open collector output 1(50 mA max) access application. It is suitable for
"Request to exit" input Yes using the multiple card badging
Max. distance from panel 1.5 km techniques which are available for
Max. number per panel bus 16
Specified cable Aritech WCAT 52/54 or equivalent the advisor MASTER control panel
Data bus monitoring Continuously monitored for offline family. A user could arm the system
condition of all devices on data bus in the evenings by badging his card
Addressing Via keypad, TITAN or config. card three times within 10 seconds
IP rating IP66 interval. Another application could be
Dimensions (W x H x D) 140 x 121 x 22 mm for doors which can be programmed
Operating temperature -40° to +50°C (32° to 122°F)
Colour Dark grey so that badging once unlocks,
Programmable OC output pulse from 1 msec to 2.5 secs badging twice with the same card
time from 1 sec to 193 days keeps the door unlocked to allow
latch people in and out without card, and
Connectivity RS485 data bus device or standard Wiegand badging three times re-locks the
for connection on the 4 reader inputs of the ATS1250 door.
Read range (cm) 6 - 10
Pry-off tamper Yes
Epoxy-filled weatherproof construction Yes
Ordering Information
Part No. Description
ATS1197 ATS Smart Card Reader with keypad supplied with 2 m cable
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your sales representative.
IPS-ATS1197-2011-05-3 04:32:46 Released : 12-MAY-06;