Product Data Sheet
ATS1197
ATS Smart Card Reader with keypad
Product Overview
The ATS smart card readers connect directly on
the RS485 data bus of the control panel or 4 Door
Controller and may be configured and addressed
via a LCD keypad. Some security options (Site
code & 4-byte security code) are only
programmable via TITAN and configuration cards.
Mainly used for outdoor applications in high
security sites where needs to be used a
combination of a card and PIN for access.
Security features
The ATS smart card technology has the ability to
programme a unique 4 billion, 4-byte, combination
security code. This allows the memory card to
unlock/open/disarm based on three keys; the card
number, the Site code and the 4-byte security
code. Once a 4-byte security code has been
created, downloaded to the programmer and the Standard Features
cards, it is not possible to read the memory on the
card or even recognise the card memory at any E Full epoxy filled weather proof construction
other reader or TITAN and programmer
combination. Communications between TITAN E Keypad
and the programmer may also be password
protected to prevent the 4-byte security code from
being uploaded from the programmer into another
PC running TITAN.
Read/write encryption
The ATS Smart card technology also features an
exclusive read/write encryption. When a card is
presented at a reader, data are downloaded into
the reader, encrypted and re-written back into the
card. The readers can also be configured to
operate in stand-alone or connected to control
devices like office equipment or vending
machines. This function enables credits to be
assigned on user cards and deducted by the
readers, purely on a usage basis. Up to 65535
credits may be allocated in up to 4 different banks
with 16 access levels and 4 locations. The reader
determines of which bank credits have to be
deducted and the number of credits per valid
presentation.