Product Data Sheet
ATS1202
ATS Plug-in 8-zone expander
Product Overview
Input expanders are devices for expanding the
input capacity of an advisor MASTER panel or a
DGP.
Depending on the basic capacity of the panel up
to 3 x ATS1202 input expanders can be used.
The unit easily can be daisy chained.
Expanding Features
A standard 8 zone DGP can have eight zones
connected to it. This can be expanded in
increments of 8, up to 32, using the ATS1202
8-Zone expanders (A DGP can have 8, 16, 24 or
32 zones).
A control panel can have 8 or 16 zones
connected to it (depending on control panel type).
There are sixteen zones allocated to every DGP
address. This can be incremented to a maximum
of 32 zones by fitting ATS1202 expander Standard Features
modules. If a DGP has 24 or 32 zones (two or
three expanders fitted), the additional system E The unit easely can be daisy chained
zone numbers are taken from the following DGP
address. If this is done, the next DGP address E Depending on the DGP or Panel 2 or 3 expander
ceases to exist and is not included to be polled modules can be fitted
e.g. DGP 1 has 24 zones (zones 17 to 40). The E A maximum of 32 zones can be expanded
next DGP in the system must now be addressed
and polled as DGP 3, because zones 33 to 40 on
DGP 1 have been taken from DGP 2.