FREQUENTLY ASKED QUESTIONS
PROBLEM
STEAM OR WATER
DRIPPING FROM AROUND
THE LID
EXCESSIVE STEAM
COMING FROM PRESSURE
ADJUSTMENT VALVE
LID NOT CLOSING
LID NOT OPENING
CONTINOUS STEAM
COMING OUT FROM
UPPER PART OF THE LID
CAUSE
- Lid not closed properly,
- Silicone ring not p aced properly, dirty or
damaged,
- Pressure adjustment valve and security
valve not working properly
- Possib e damage on the rim of the pot
- Excess fire or wrong pressure.
- If cooker starts boiling when lid is Open
and if dense steam coming out, I'd will not
_ pressure left in the pot.
- Pressure security pin is stuck.
- Mechanical system of lid defected.
- Heat is not sufficient.
- Liquid inside the pot is not sufficient.
- Pressure adjustment valve is on Zero
level.
- Silicone ring is damaged.
SOLUTION
- Reduce the pressure by placing the cooker under cold running water
and open the lid. Check the silicone ring, pressure adjustment valve
and security valve by removing the lid
• Clean the silicone ring and place it correctly. damaged replace with
the spare one.
• After each 2-3 times cooking do the cleaning and maintenance of
adjustment and security valves,
- Make sure the rim of the pot is clean and undamaged.
- Place the lid correctly and closed carefully.
- Check the pressure adjustment leve .
- Reduce the heat.
- Tum off the stove, wait unti the boiling stops. When the boiling is over
you may close the lid.
- Make sure there is no pressure in the pot.
- Switch the pressure safety lock by using a thin tool to normal position
as shown in picture 1 (arrow sign no 2).
- Clean the pressure safety valve.
- Ifthe id still does not open contact the sel er or manufacturer.
- Increase the fire.
- Fill with at least one glass of water or liquid.
- Set the pressure level at 'eve! 1 or level 2.
- Replace the silicone ring with a one.