Preparation
Perform the same hardness level adjustment that you have set on the control
panel also with the regeneration adjustment switch. For example, if you
have adjusted to "3rd level" in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
0th Level 1st Level 2nd Level
3rd Level 4th Level 5th Level
1
2
5
2
3
4
3
-2
4
If the hardness level of the supply water is above 90 OdF or if you are using
well water, then it is recommended to use water purification devices and
special filters.
If the hardness level of the supply water is below 130dF, there is no need to
use salt in your dishwasher. If this is the case, "No Salt Warning Indicator" (if
any) illuminates continuously on the panel of your machine.
If the water hardness level adjustment is set to level I, the "No salt warning
indicator" will illuminate continuously although it is not necessary to use salt.
If you use salt under this condition, salt will not be consumed and the Salt
indicator will not illuminate.
If you move your house,
i
it is necessary to readjust
water hardness level of your
machine by considering the
information given above
according to the hardness
level of the supply water
in your new location. Your
machine will display the
most recently adjusted water
hardness level.
Dishwasher / User's Manual
15/51 EN