Preparation
Adjusting the water softening system
Cleaning, rinsing and drying performance of your dishwasher will increase when
water softening system is adjusted properly.
Adjust the new water hardness level according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product according to the steps given below to
determine hardness level of your supply water.
Remove the test
strip from the
packet.
1 Second
Tum on the tap and Hold the test strip in Remove the test
let the water run for the water for about strip from the water
about a minute. a second.
and shake it.
1 Minute
Wait for 1 minute.
The test strip shows
u the hardness
leovel
After determining hardness level of the supply water:
1 . Switch on the machine and press the Time Delay and P keys simultaneously.
Hold the keys pressed until entering the Settings menu. Rinse Aid and Salt
indicators (model dependant) will flash on the display.
2. Select the salt indicator with the program key. Current regeneration level is
displayed on the display.
3. Using Time Delay key, adjust water hardness level according to the hardness
of the supply water. For correct setting please see "Water hardness level
adjustment table"
4. Press On / Off key to save the setting
Water hardness level adjustment table
Hardness
English Water German Water French Water
Level
1st Level
2nd Level
3rd Level
4th Level
5th Level
14/51 EN
Water Hardness Level Indicator
Hardness OdE Hardness 0 dB Hardness OdF
0-5
6-9
10-15
16-19
20-24
25$2
0-4
5-7
8-12
13-15
16-19
20-50
0-8
9-13
14-22
23-27
28-34
35-90
Press the Time Delay key to SWItch the water hardness
level to position Pl.
Press the Time Delay key to switch the water hardness
level to position P2.
Press the Time Delay key to switch the water hardness
evel to position P3.
Press the Time Delay key to switch the water hardness
evel to position
Press the Tlme Delay key to switch the water hardness
evel to position P5.
Dishwasher / User's Manual