Unimep ORION SERİSİ 1-2-4-6-8-10 TABANCALI ,1-2-3-4-5 ÜRÜNLÜ, LCD EKRANLI, LİTRE-PARA YAZAR , DALGIÇ/ EMİŞLİ POMPALI Akaryakıt Dağıtım Pompaları

     EXAMPLE : 1.500. 00 $                 1.5 0 0. 0 0 
     preset                                - P -
       Press ‘Enter’, ’1’ , ’5 ’ , ’0’ , ’0’ keys in the     order and
see above display.

       •  Enter preset amount by observing display carefully.
       •  Remove nozzle if value, you see on display is true. Else, press ‘CLR’ and re-enter 
          correct value.
       •  Motor and solenoids starts automatically and delivery begins as you press nozzle 
          trigger.
       •  Delivery speed will be adjusted by CPU itself and stops at the exact value you have 
          entered.


     2. ENTERING VOLUME PRESET :

     Volume preset is entered by using numeric keys only. 

     Follow the procedure:

       •  Be sure that nozzle is in its place before entering preset.
       •  Press ‘Enter’ key twice and see ‘-L-‘ symbol on display.
       •  Use numeric keys for entering the integer part of volume preset as you wish. Rational 
          part of value is always .00.


     EXAMP : 125 Lt preset                 - L -

                                           1 2 5. 0 0


     Press ‘Ente’ ,’Enter ’, ’1 ’, ’2 ’, ’5 ’keys and       see 125.00
on the middle part of display.

       •  Remove nozzle and start delivery.That is all. 

     IMPORTANT NOTES ABOUT PRESET DELIVERIES :

       •  Do not press ‘Enter’ after entering preset value and before removing nozzle.
       •  If you remove nozzle for the product that is not the one,your customer want,then 
          place that nozzle but re- enter preset before removing correct nozzle.(for 
          multiproduct dispensers)
       •  If you place nozzle, before the value you entered,this ignores preset and sale is 
          finished at the value you really delivered.
       •  Observe the display carefully when entering preset.(especially control the number 
          of zeros carefully)
       •  You can not change preset value after nozzle removing and also at any time of 
          delivery.Preset entering is not allowed while delivery is going on.
       •  If you enter a preset value and remove nozzle.But, if site controller sends an 
          amound preset message at the same time,then CPU makes a comparing between 
          two preset values and accepts the smaller one.

     II. OBSERVING THE DELIVERY SPEED (as Lt/min):

     You can observe the flowing rate of delivery if you press ‘1’, while display is counting.Price 
screen will turn to show you the delivery speed as Lt/min.
     Pressing ‘CLR’ key ignores this function and display turns to show price per liter again.


                                                                    43