Unimep BIGBANG SERİSİ 1-2-4-6-8-10 TABANCALI, 1-2-3-4-5 ÜRÜNLÜ, LCD EKRANLI, LİTRE-PARA YAZAR, DALGIÇ/EMİŞLİ POMPALI Akaryakıt Dağıtım Pompaları

      RECALLING INFORMATION OF RECENT DELIVERIES ( P-N00...P-N09 ):

      When a delivery is finished,all information including amount,volume and price of delivery 
is saved in a separate memory location to provide recalling soon. You can re observe previous 
sales’ display data when you want.
         •   Press ‘0’,and see ‘P-000’ or ‘P—00’.
         •   Enter nozzle number from left and 01 to 09 according to oldness of sale then press 
             ‘Enter’
         •   Display will show you the data belonging to that delivery for 4 seconds and turns to 
             original form.

      EXAMPLE : You want to recall display data for the delivery made from nozzle number 4 and 
delivery is 2 th preceding from the last.
      Press ‘0’, ‘4’, ‘0’, ‘2’ in correct order and see ‘P-402’. Press ‘Enter’.You will see the information 
for this delivery,including its amount,volume and unit price for 4 seconds with a continous beeep 
sound.Then display automatically turns to its original form of showing the last delivery information.

      DISPLAY TESTING PROGRAM ( P-055 ):

      As you know that display unit is a seven segment type LCD and current ways of each segment 
is separate.If there is a problem on the current way of a segment then,this segment will not work. 
      For example, if segment ‘a’ of a digit is defective then, a digit ‘7’ will be seen as ‘1’.

      You can control whether such a problem is present or not on a digit.

      Press ‘0’,’5’,’5’ in correct order and see ‘P-55’ on the screen. Now pressing ‘Enter’ you will see a 
display counting from 0 to 9 that numbers are the same at all digit positions.
      Each form will be displayed for 2 seconds and counts up to next number. One can easily see a 
fault occur on a segment position of a digit with careful observation.
      Display will turn to original form after number 9 is displayed.


   0 0 0 0 0 0 0. 0 0 0                         I I I I I I I. I I I 
      0 0 0 0 0 0. 0 0 0                           I I I I I I. I I I                ....
        0 0 0 0 0. 0 0 0                             I I I I I. I I I


OBSERVING THE DATE OF MANUFACTURE AND FIRMWARE OF CPU SOFTWARE ( P-070 ): 

      This data is entered by manufacturer in production line and you can see entering this program.

below.Press ‘0’, ‘7’, ‘0’ keys in order and see ‘P-070’.Press ‘Enter’ and see data as in example shown 

      EXAMPLE :        0 5 0 6 2 0 0 3 
                          P S r.0 0 1


      Date of manufacture           : 5th, June 2003
      Firmware                    : 001


      SETTING THE REAL TIME CLOCK AND DATE (P-071)

      There is a real time clock allowed on CPU board and you can set it.


                                                                                          47