* LCA 52 66 242 7 * YAMAHA * RJ14 * 2002/24 * -- * Page 20
2.2.1.7. Single Directive 93/34/EEC (as amended by 1999/25/EC)
2.2.1.7.1. Title
Statutory markings for two- or three-wheel motor vehicles
2.2.1.7.2. Manufacturer's data plate
The manufacturer's data plate is firmly glued to the vehicle frame in the
position as shown in Annex C, page 110.
The plate contains all required information in an indelible form inside a
clearly marked rectangle.
2.2.1.7.3. Vehicle identification number (VIN)
The VIN is given on the manufacturer's data plate and is punched on right
side of the steering head pipe. It is easily accessible and cannot be
obliterated or changed easily. It is structured in three parts as indicated in
the Annex to Directive 93/34/EEC.
The beginning and end of this line is marked by a symbol which is neither
an Arabic numeral nor a capital Latin letter, nor it is possible to confuse this
with any such character. Details see Annex C, page 110.
2.2.1.7.4. Characters
All characters used on the manufacturer data plate and in the vehicle
identification number are in accordance with the requirements of the Annex
to Directive 93/34/EEC.
2.2.1.8. Single Directive 93/92/EEC (as amended by 2000/73/EC)
2.2.1.8.1. Title
Installation of lighting and light-signalling devices on two- or three-wheel
motor vehicles
2.2.1.8.2. Lighting and light-signalling devices
Component type-approval marks, manufacturer’s marks see Annex C,
page 95, 97, 99 and 101.
Position (location) and arrangement see Annex C, page 94, 96, 98 and 100.
Geometric visibility complies with the requirements of Annex IV to
Directive 93/92/EEC for all lighting and light-signalling devices.
Electrical connections are according to Annex IV, paragraphs 6.1.9., 6.2.9,
6.3.9., 6.4.9., 6.5.8., 6.6.9., 6.9.2. and 6.10.9. of Directive 93/92/EEC.
...