11-Do not touch the muffler. Since the temperature around the muffler is above 80°C, there is a danger of hurting
Yourself. Parts.
12-During the operation if you hit any item with the device, stop the engine and
do not operate before repair.
To avoid fire;
Do not fill the fuel tank above the fuel level sign.
- To prevent pouring of fuel onto the engine and frame, use the measuring cup
as well as the funnel.
- While filling the tank with funnel do not smoke and keep flammable materials away.
- De not operate the device in areas with explosive materials.
- De not overturn the machine during servicing, when there is fuel in the fuel tank.
- Do not fili the fuel tank while the engine is operating.
- Do not pull out the fuel hose while the engine is operating or while it is hot.
- Do not stad up the engine without the ignition plug.
13-Do not omit any of the parts on the air blower.
14-Keep the product out of the direct sunlight to protect it against the influences of the ultraviolet radiation.
15-Empty the fuel tank after every use.
16-Pull out the ignition plug after finishing the operation.
17-Wash yourself after each operation with clean water.
18-For a safety operation, always use original spare parts.
19-Do not operate the machine without the pleated hose.
20-
21-
22-
23-
24-
25-
2- SIVI ILAÇ KULLANIMI İÇIN ALETİN MONTAJI
Boğumlu hortum (3) dirseğe (4) geçirin.Kelepçe l'i (11) takıp sıkın.Püskürtme borusunu (5) boğumlu hortuma
geçirerek kelepçe-2'yi 12) sıkın.İlaç hortumu-l'i (10) musluğun (9) girişine takm.ilaç hortumu 2 (8) ile musluğun
çıkışını ve debi ayar musluğunu (7) birleştirin.Depo kapağını açarak hortum bağlantılarının (Şeki1:3) teki gibi olup
olmadığını kontrol edin.
2- ASSAMBLIES FOR LIQUID APPLICATIONS
Connect flexible hose (3) to elbow (4) of the machine and tighten the clamp-1 (11). Connect Spray tube (5) to flexible
hose and tighten clamp-2 (12). Connect chemical hose-1 (10) to inlet side of on-off tap (9) and also chemical hose-2
(8) to outlet side of on-off tap (7) and dosage sleeve. Check if hose connections are the same as shown on fig. 3 via
opening chemical tank lid.
1 -Depo/Store
2-Motor/Engine
3-Boğumlu Hortum/Connect flexible
hose
4-Dirsek/Elbow
5-Piiskürtme Borusu
6-Püskürtnıe Başlığı
7-Debi Ayar Musluğu/
8-İlaç Hortumu 2/Chemical hose 1
9-MuslukiTap
10-İlaç Hortunuı I/Chen-ılıca] hose 2
11-Kelepçe I/Clamp 1
12-Kelepçe 2/Clamp 2
3-Kahza/Handle
14-Gaz Kolu/Gas
15-Toz Kolu/
(5)