The warranty specifications of this machine, which is produced by TARAL are giyen in the warranty certificate
supplied together with this machine. This warranty certificate, which is prepared regarding the regulations based on
the Law About the Protection of the Consumer with the date of 23.02.1995 and number of 4077, is giyen with the
permission of the Ministry of Industry and Trade, Istanbul Industry and Trade City Management.
1- The machine is out of the framework of the warranty, if the machine is operated disregarding the first operation
procedure described in this manual.
2- The responsibility of the producer company does not include the damages to the human beings and other items
during operation, even if they depend on the flaw or production errors. Therefore the tost of any direct and indirect
damage and loss will not be paid.
3- If the serial number stamped on the machine is charged, if any modification is made, if the machine is involved in
an accident, if the buyer does not obey the responsibilities in the contract appropriately, if the assembly is not done
by the authorized personnel of the producer company, if any modification or maintenance is performed without the
permission of the producer company, the warranty is not valid.
4- In the case of any disagreement, as stated in the corresponding regulations and laws, the consumer has the right to
apply to the arbitration committee and consumer courts.
5- The operation life of the machine is 10 years.
6- TARAL AUTHORIZED SERVICE BOOKLET will be giyen to you with the machine. You can make use of this
booklet for your service or spare parts needs.
4-İLK ÇALIŞTIRMA / FIRST OPERATION
Değerli müşterimiz, ürünümüzü kullanmaya başlamadan önce, ürünle birlikte verilen İLK ÇALIŞTIRMA KUPONU
ile birlikte size en yakın TARAL Yetkili Servisine başvurarak makinenizin İLK ÇALIŞTIRMASINI yaptırınız Bu
işlem için, makinaya eklenecek yağ, yakıt vb. sarf malzemeleri hariç herhangi bir ücret ödemeyeceksiniz. Bu işlem
sırasında size makinanın kullanımı ve bakımı hususunda bilgi verilecektir. TARAL Yetkili Servisince İlk Çalıştırma
işlemi yapılmamış makineler GARANTI KAPSAMI DIŞINA ÇIKACAKTIR.
Dear consumers, before starting to use our product, make the first operation of your machine by visiting the TARAL
authorized service, which is nearest to your location, together with the FIRST OPERATION COUPON supplied with
the machine. You will not be charged for this, except for the materials to be added to the machine like oil, fuel, etc.
During this procedure you will be informed about the operation and maintenance of the machine. The machines,
which are not gone through the first operation procedure performed by TARAL authorized service, will be
EXCLUDED FROM THE SCOPE OF WARRANTY
5- MAKİNANIN KULLANIMI / OPERATION OF THE MACHINE
Taral daima ürettiği malın tasarımve kalitesini sürekli geliştirmeye gayret eder. Bu tanıtma ve kullanma kılavuzu
basıldığında en son ve en yeni bilgileri içermesine rağmen toprak frezesi ile tanıtma ve kullanma kılavuzu arasında
bazı küçük farklılıklar olabilir. Kılavuzla ilgili herhangi bir şüpheli durumda lütfen bir yetkili satıcımıza başvurun. Bu
tanıtma ve kullanma kılavuzu toprak frezesinin eksiksiz bir parçasıdır. Ve daima makina satıldığında makina ile
birlikte verilir.
Önce stop manetini (1) daha sonra debriyaj manetini (2)
sıkarak kilit mandalı (3) ile iki maneti kilitleyin.Daha sonra
motor el kitabına göre motorunuzu çalıştırın.Stop manetini
(1)sıkı vaziyette iken debriyaj manetini bırakarak aletinizi
kullammz.
Taral always tries to develop the design and the quality of the la) la)
machine that it produces continuously. When this owner's manual was pressed, although it had included the latest and the
newest information, there might be some minor differences between the motor-hoe and the introduction and user's
manual. In case of any doubt on the manual, please consult to one ofour authorized dealers.
This introduction and user's manual is a complete part of the motor-hoe. and always it is giyen along with the machine
when the machine is sold.
By squeezingfirstly the stop handle (1) and later on the clutch handle (2), lock the locking latch (3) and the two handles.
Later on run your motor according to the motor user's manual. Use your device by releasing the clutch handle while the
stop handle (1) was in tight posi don.
5.1- MONTAJ/ASSEMBLY
FREZELERİN MONT / ASSEMBLY OF THE MILLING CUTTERS
Aksesuarlan taşıyan mil, freze veya diğer aksesuarların kolaylıkla takılmasını sağlamak için frezeli bir profilde
yapılmıştır. Montaj işlemini aşağıda açıklandığı gibi gerçekleştirin.
(5)