may be prevented that the appliance starts to operate when the installation of components
are not completed; and thus unnecessary damage to the appliance and injury to persons
may be prevented.
2. Before starting to juice. ensure that the juice filter and wheel are engaged to their
seats and that there is no harsh contact between the blade filter and the transparent
cover. Place the transparent cover, insert handle to the cover housing and then operate
the appliance.
3. Before operation, bring the juice spout to sealing position to prevent juice from
overflowing and soiling the table after turning on the appliance
4. Note: The force you apply while pushing the food with the pusher shall be equal and
indirect; pushing force shall not exceed 1 kg and force shall not be applied abruptly;
otherwise juicing efficiency may be reduced.
Operating Period
This appliance is designed with a rocker switch for power level of C / I / Il (O for stopping,
l: less power, Il: higher power). Select higher power position for juicing. Stop for 1 minute
after operating for 1 minute; then operate again. After performing the operation above
3 times, stop the appliance for 15 minutes and do not operate until it is cooled. This would
increase the service life of the appliance and it shall operate more efficiently.
Precautions
1. Place the appliance on a fixed and level counter before starting to operate. Operate
as described above.
2. Before starting to juice, ensure that the juice filter and wheel are engaged to their
seats and that there is no harsh contact between the blade filter and the transparent
cover. Place the transparent cover, insert handle to the cover housing and then operate
the appliance.
3. Before the initial operation. motor shall operate in phase, it may cause a strange smell
and sparks; this is normal. The phenomena described above shall disappear when the
motor is operated for some time.
4. Ensure that not much juice and pulp is left in the center housing and in the pulp
container while juicing. If they are filled, please turn off the appliance, clean the components
and then use the appliance again.
5. Do not open the container cover during operation. Do not insert your hand or any wire
from the feeding chute while the appliance is on; otherwise accidents with great damage
may occur and appliance may be damaged.
6. A protective device against excessive heat is installed in the motor to increase the
sen,'ice life of this appliance. If the motor is overloaded or operated for a long period of
time and exceeds the warning temperature, power to the appliance shall be cut off
automatically. When the motor is stopped, unplug the appliance. wait for the motor to
cool down (about 30 minutes). then operate again.