ENGLISH
SINBO SJ 3143 JUICER
USER MANUAL
Please read all instructions carefully before starting to use your appliance.
Names and Locations of Main Components
1. Pusher cover, 2. Pusher, 3. Transparent upper cover, 4. Juice filter, 5. Pulp container
6. Juice spout, 7. Jug cover, 8. Foam separator, 9. Jug, 10. Nonnslip base, 11. Power
Cord, 12. Body. 13. Lock latch
Technical Specifications
AC230V. 50Hz, IOOOW
Features
1. It has a delicate, simple and beautiful design thanks to Its combined structure; it is
easy to operate and clean.
2. High speed motor with overheating protection; high efficiency. economy in terms of
time and power; long motor service life.
3. A safety lock device Is used for switching to ensure safety and reliability during
operation.
4. Juice spout design with sealing function
Warnings Before Use
1. This appliance is equipped with a safety device; motor does not operate and secures
the safety of the user when the handle is not seated on the cover or when the blade base
is not pressed.
2. While removing or installing the components of the juicer, press the upper part of the
feeding chute on the cover with your hand and push the handle inside to slide it inside
or outside of the cover housing.
3. To remove the juice filter, remove the cover and pulp container first; then rotate the
center ring up to 30 degrees while holding the juice spout by your hand and move it
upwards; filter shall be detached from the wheel automatically.
4. Check whether your power source is compatible with the rated voltage of the appliance
before using the appliance to prevent damages.
5. Clean all detachable components (Refer to "Maintenance and Cleaning" l,
6. Please follow the "Names and Locations of Main Components" diagram carefully while
installing the components.
7. Please read the "Warnings" section carefully before starting to use your appliance.
Juicing
1. Ensure that the switch on your appliance is off before using your appliance. Thus. it