MAINTENANCE AND CLEANING
* Pull the plug out before cleaning. Empty the water inside and wait for the kettle to cool
down.
* Wipe your kettle with a damp cloth first and then dry with dry cloth.
* Do not use harsh cleaning agents. Otherwise, the body of your appliance shall be
damaged due to abrasion.
Wipe inside the kettle with a cloth dampened with detergent.
* Furring may occur within the interior of kettle in normal conditions of use and may
result in some color variations. Furring accumulated in the kettle can be eliminated by
boiling equal amount of vinegar and water (500ml/2 glasses of each is recommended).
When water boils allow the mixture remain in device for a few hours or overnight. Empty
the mixture and fill the kettle up to the MAX level with fresh water. Boil and empty water.
Repeat this procedure for intense furring.
NOTE: This calcification intervals might be delayed by emptying remaining water every
time and refilling the device.
• Do not use abrasive cleaners.
* Do not immerse the power cord and the kettle into water.
Short power cord is provided to reduce winding and tripping hazards. Provided that
required care is taken, an extension cord might be used. If an extension cord is used.
nominal voltage value of the extension cord shall be at least equal to the voltage value
of the electrical appliance.
DURING TRANSPORTATION AND HANDLING
• Do not drop the product,
• Protect from Impacts,
• Ensure it doesn't get crushed or squeezed,
• Observe the marks on the packaging,
• Unplug the power cord when you don't use the appliance.
DISPOSE ENVIRONMENT FRIENDLY
You can help the environment be protected!
Please follow the local regulations: Deliver the electrical equipment not running to a
suitable waste collection centre.