If the plug does not properly fit in the outlet, please consult a qualified electrician. Do
not change the outlet or do not use an adapter.
TECHNICAL SPECIFICATIONS
1. Maximum capacity 1 L
2. Indicator light for operation
3. Practical operation
4. 304 quality stainless body
5. Concealed resistance
6. Dry run protection
7. Easy to clean
8. Cord wrapping slot
9. DC12V. 120w
BEFORE FIRST USE
* Read all the instructions and keep for future reference.
* Remove the entire package.
* Firstly boiled water shall be emptied.
CAUTION! Do not operate move the vehicle while the kettle is operated. As the water
may be spilled around when it used in the vibration of the vehicle. it may harm you and
your vehicle.
USAGE INSTRUCTIONS
• Fill the kettle so that the water level it at MAX. line.
* Do not use the appliance for anything other than boiling water. Other liquids will
contaminate the interior of the kettle.
Do not fill over Max. level. Overfilling may cause water to spill over during boiling.
• Plug the appliance to the lighter inlet to operate the appliance. Operation indicator light
will turn on indicating that the kettle is in boiling phase.
Your kettle heats the water in approximately 20 minutes for a maximum fill.
* If you wish to use the kettle again, allow heat safety circuit to cool down for 15020
seconds and then plug it to the lighter inlet again.
* Since the lid and surface will be hot, hold the kettle only by its handle.
After use, leave the kettle on a heat proof surface.
* If the kettle accidentally turns on when it is empty, heat adjuster will automatically turn
off the device in order to prevent it from overheating. If this is the case, unplug the power
cord and allow kettle to cool down before refilling.
When the device is not used, it is recommended that the power cord is unplugged.
NOTE: Make sure that your appliance has water in it when you plug the adaptor to the
lighter inlet.
070