2 Basic Operation
EN
Installing the Software
Note
Exit the Program PicoPix viewer 2
I Close all open programs and applications before
beginning the installation process.
Click on the button Exit in the software or
do the following:
2 Connect the device with a USB socket of your com-
l) Click on the PicoPix viewer 2 symbol
puter.
in the Windows task bar using the right
3 Select PicoPix 2055 as drive in the Windows
mouse key.
Explorer and start the programPicoPix viewer 2
setup.exe with a double-click.
2) Click on Exit.
4 Your computer will now prepare for the installation
Uninstalling the Software
process. Follow the instructions of the installation
wizard and restart the computer.
Note
Disconnect the Device from the
Computer
Disconnect the device from the computer
before restarting. The computer may try
to boot from the Pocket Projector, which
was recognized as a USB storage medium.
Set up the Device
I Connect the device to your computer on two USB
sockets by means of the Y-USB cable in order to
ensure the full performance of the device.
2 Start the program PicoPix viewer 2. A symbol
appears in the statusbar. The Pocket Projector is
switched on and projects the image from the com-
puter. A windows open where you can choose
between mirrored or advanced projection as well as
setting the brightness.
Brightness (Bright Mode) „ up to 55 lumen
Note
Screen Resolution Of the Computer
I The best picture quality can be reached, if
Screen m up to 3m
the screen resolution of the computer is
set to 800 x 600 pixel.
N Ote
Brightness of Projector
At first installation the devices starts with
minimum level of brightness.
3 Adjust the focus using the focus wheel.
4 Disconnect the USB cable from the computer if you
finish the presentation to save energy and exit
RAM . — . IGB DDR SDRAM
Free Hard Drive Space —
2
3
4
Close all open programs and applications before
beginning the uninstall process. Load the uninstall
program by clicking on PicoPix viewer
2 Uninstall PicoPix viewer 2 in the Start menu.
Your computer will now prepare for the uninstall
process.
Follow the instructions On the screen.
At the conclusion of the uninstall process you must
restart your computer.
After rebooting has occurred, removal of PicoPix
viewer 2 from your computer will be complete.
Technical Data
Technology I Optical
Display technology........
WVGA 0,3" DLP
Light source......
. RGB LED
Resolution.....
. 854x 480 pixel (16:9)
Supported Resolutions —
SVGA,'XGAfWXGA
Contrast ratio........
. 1000: I
Projected image size....
12-120 inch
Horizontal Scan Rate
..31-69kHz
Vertical Scan Rate .
56-85 Hz
Power Supply
...via USB plug
Dimensions (L x H x \N)...
...72x27X72mm
Weight.....
. ..o,1 15kg
Recommended
...5-350C
Relative Humidity....
15—80% (non-condensing)
Minimum PC Requirements
Processor...... . .......lntel Pentium M or AMD Athlon
Clock
2GHz
Operating System .......Windows XP Professional (SP2),
. Vista, Windows 7, Mac OS 10.6
PicoPix viewer 2.
6
USB Port
. .40 MB
USB 2.0
All data are provided for reference purposes only.
Sagemcom reserves the right to make any changes
without prior notice.
Philips • PPX2055