0.8. Name(s) and address(es) of assembly plant(s):
Nissan Mexicana, S.A. de C.V. Nissan Mexicana, S.A. de C.V.
Carretera Logos de Moreno Km. 75 Paseo Cuauhnahuac Km 4.5
Aguascalientes Ags Jiutepec Morelos
Mexico C.P. 20290 Mexico C.P. 62500
The undersigned hereby certifies the accuracy of the manufacturer's description in the attached
information document of the vehicle(s) described above ((a) sample(s) having been selected by the EC
type-approval authority and submitted by the manufacturer as prototype(s) of the vehicle type) and that
the attached test results are applicable to the vehicle type.
1. For complete and completed vehicles/variants (1):
The vehicle type meets (1) the technical requirements of all the relevant separate Directives as
prescribed in Annex IV and Annex XI (1) (4) to Directive 1970/156/EEC.
2. For incomplete vehicles/variants (1): Not applicable
The vehicle type meets/does not meet (1) the technical requirements of the separate Directives
listed in the table on side 2.
3. The approval is granted (1)
4. The approval is granted in accordance with Article 8(2)(c) and the validity of the approval is
thus limited to dd/mm/yy. Not applicable
Place: BR1STOL
Signature: A.W. STENNING
Head of Technical 8, Quality Group
Date: 31 JANUARY 2008
Attachments: Infornnation package.
Test results Annex VIII).
Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign
certificates of conformity and a statement of their position in the company.
NB: If this model is used for type-approval pursuant to Article 8(2), it may not bear the
heading, "EC vehicle type-approval certificate" except in the case referred to in
paragraph 2(c) where the Commission has approved the report.
EWH185810 An executive agency of the Department for Transport