Kullanım Kılavuzları
Scope of delivery The scope of delivery of the device is illustrated on the packaging. Check the content for completeness upon unpacking In the event of missing accessories or any transport da- mage, please contact your dealer. Additionally required Fabric-reinforced water hose with commercially available coupling Minimum diameter, 1/2 inches (13 mm). Minimum length 7.5 m, Description of the Appliance These operating instructions describe the maximum equipment. Depending on the model, there are differen- ces in the scopes of delivery (see packaging). See fold-out page 4 for illustrations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 1 Coupling element for water connection Water connection with integrated sieve High pressure hose Hose guide Storage for spray lances Storage / parking position for trigger gun Connection for Plug Clean detergent Carrying handle Transport handle, detachable Hose switch High pressure connection Appliance switch "O/OFF'/ „I/ON" Mains cable with mains plug Accessory compartment Hooks for fastening the net Net for accessory compartment Bearing wheel Base with carrying handle Full Control trigger gun Battery compartment LED pressure indicator MIX/ 1 - SOFT 2 - MEDIUM / 3 - HARD Battery compartment lock Lock trigger gun Button for detaching the high-pressure hose from the trigger gun Full Control spray lance Vario Power Carrying out the most common cleaning tasks Pressure levels: HARD / MEDIUM 1 SOFT 1 MIX Full Control spray lance dirt grinder For strong contaminations Pressure level: HARD Optional accessories Plug 'n' Clean detergent bottle with locking lid not included in the scope of delivery Water supply hose Special accessories Assembly See fold-out page 3 for illustrations Mount loose parts delivered with appliance pri- or to start-up. Attach the net to the accessory compartmen Illustration Hook the net into the hooks shown in the illustrati- Start up park the appliance on an even surface. Illustration Pull the high-pressure hose completely through the hose guide to the front. Illustration Push the high pressure hose into the trigger gun until it locks audibly, Note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling On the high pressure hose. Insert the mains plug into the socket. The highest allowed net impedance at the electrical connection point (refer to technical data) is not to be ex- ceeded. In case of confusion regarding the power impe- dance present on your connection, please contact your utilities provider. Water supply For connection values, see type plate/technical data. Impurities in the water can damage the high-pressure pump and the accessories. For protection, the use of the KARCHER water filter (optional accessory, order no. 4.730-059) is recommended. Water supply from mains Observe regulations of water supplier. A TTENTION Hose couplings made Of metal with aquastop can da- mage the pump! Please use plastic couplings or KAR- CHER brass couplings. Illustration Screw the coupling element to the water connec- tion on the appliance. Attach the water supply hose to the coupling on the water connection. Connect the water supply hose to the water supply. Completely open the water tap. Special accessories expand the possibilities Of using your appliance. Please contact your KÄRCHER dealer for further information. 12