AUTO CODE SEARCH :
1.Press and release the function key which
you want to set first .
3.Press and hold [SET] key for 3 seconds,
it will show SETUP and flash twice.
4.Then it will show PRE-CODE. You can use
the CH+ or CH- key to select AUTO, PS MODE or RESET. You
press and release the [SET] key to select the AUTO setup menu.
5.The code number of the Device will be flashing on the LCD.
6.Press and release the CH+/-, it will start the auto searching.
7.If you press and release the CH+/ - again, it will change the
searching direction.
8.after searching the corrected code ,your target AC will make
BEEP sound ,then you can press [SET] key to save the CODE .
It will show OK on the LCD and EXIT the setup mode.
TEMP TEMP TEMP TEMP
23 23 23 23
SETUP PRE-CODE AUTO PS MODE
AM 12:47 AM 12:47 AM12:47 AM12:47
TEMP TEMP
23 23 23 23
RESET AUTO AIR CON 1 AIR CON 1
AM12:47 AM
12:47 400 390
TEMP TEMP TEMP23
23 23
AIR CON 1 OK EXIT
395 395 395
Note :
1.If no key on your remote is pressed over 30 seconds, the
programming process will stop automatically, and you will have
to start over.
2.If LCD don't flash on the setting mode, it stands for exit the
setting mode.
13