according to the set values determined at the next
Temperature Indicator: It shows the mode.
measured temperature value. When the set button
is pressed, the set temperature value is indicated. Time Mode Indicator: It indicates the
In case of failure, it displays the type of warning. actual mode where the device functions or the
machine adjustments are made. Each program
Temperature Set Button: It is used to see consists of these 3 modes. When the start is
the set value of temperature. When it is pressed, engaged, first t1, then t2 and finally t3 modes are
the set value appears on the indicator and starts to processed. "00" is entered in the time set value of
flash. the mode, which is not demanded to be processed.
Time Count Led: It means that the time In such a case, the machine goes to the next mode
count is engaged. After that the temperature without processing that mode.
reaches the set value, time count starts and the led Combiner Selection Mode: It is the button
starts to flash. which selects the convection, steam or combined
(steam + convection) cooking rates. The cooking
Time Indicator: It indicates the adjusted is performed only with the heaters at 100 %
time value. When the set button is pressed, the set convection, only with steam at 100 % vapor and
time value is indicated. according to heater and steam % rates during 1
Time Set Button : It is used to see the set minute periods for the others. At each pressing of
value of time. When it is pressed, the set value the button, the rate moves one unit to the right.
appears on the indicator and starts to flash. When repressed following the 100 % steam, it
returns to the beginning. This can be entered
Start-Stop Button : It operates the separately for all the modes in the whole program.
determined program. When repressed, it stops
that. When the machine is on the start position,
the led on the left upper corner is illuminated and Combiner Rate Indicator: It
when the stop position is taken, the led gets out. indicates the steam/convection rate selected
The set values can not be changed on start through the combiner selection button. % reds
position. When the start is engaged, 3 different show the convection and % blues indicate the
modes constituting the selected program start to steam cooking rates.
operate one following the other. The machine gets Manual Steam Supply Button: It is the
to the stop position once the t3 mode is processed. button which ensures the steam supply to the oven
during convection cooking. As long as it is kept
Program Indicator: It displays the number pressed, it supplies steam to the oven. When the
of the programs where the temperature, time, time oven inner temperature is less than 1000C, it does
mode and combiner rates are registered. not supply steam when pressed. A-2 is displayed
: Manual Program on the temperature indicator and the machine
furnishes sound warning.
Increase Button: It increases the
temperature, time and program values by one as ON/OFF Button: when pressed during 1
per the related groups. When kept pressed, it second, it energizes the machine and has it ready
increases these automatically. for the function. In this case, the led on the left
upper corner keeps being illuminated. When
Decrease Button: It decreases the repressed, it cuts the energy to the device and the
temperature, time and program values by one as led gets off. When taken to the OFF position, if
per the related groups. When kept pressed, it the oven temperature is above 1000C, it stops all
decreases these automatically. the operations, disconnects the indicators and
NOTE: All the increase and decrease buttons enters in the cooling regime having connected the
function only on STOP position. fan. In such a case, only the temperature indicator
shows the oven temperature.
Mode Selection Button:It ensures the
selection of the modes constituting each program Lamp Button: It ensures the inner lightning
(t1, t2, t3) for the entrance of temperature, time of the oven. When the lamp is connected, the led
and combiner rates. At each pressing, the mode on the left upper corner is illuminated. When
increases by 1. When repressed after t3, it returns repressed, the lamp and led get off.
to the beginning (t1). At each mode, the Fan Button: It ensures that the fan is
temperature, time and combiner rates can be engaged and disengaged. When the heaters are
separately entered. When pressed on start engaged or at stop regime, it is automatically
position, the machine continues to operate engaged. On stop position or during steam
12