realized, it is returned to the 1. step and other flashing for some time, it starts to show the actual
steps are repeated having chosen the new program (measured on that point) values. Time starts to
number. count when the temperature reaches the adjusted
6-Fan Speed Adjustment: (set) value. The set time value decreases by one at
the end of each minute. If the oven door is opened
when the time counts down, the machine emits
continuous warning signal and the time count
stops. When the door is closed, the warning stops
This feature is independent and time continues to count down from where it
from the programs. It should be adjusted has remained. When the time is reset, interrupted
manually. It is not memorized. It determines the warning is emitted and the heaters and fan are
cycle of the fan, when this is engaged. stopped and the stop position is taken. If it is
3.2.2 - Control of the program parameters meant to stop working before the end of time,
and Operation START/STOP button is pressed again.
1-The program is selected: PROGRAMMED START:
Through the increase and decrease buttons, the The program number, the temperature, time, time
program is chosen the parameters of which are to mode and combiner rates of which have been
be controlled (manual program included). In such previously entered, is selected through the
a case, the temperature, time, time mode and program increase and decrease button. The
combiner rates appear on the related displays and adjusted values appear on the related indicators.
starts to flash. The time mode is on " t1 ". After flashing for some time, it starts to show the
2-Temperature Set Values: actual (measured on that point) values. When the
The set temperature value is read on the start/stop button is pressed, the temperature, time
temperature indicator. and combiner rate entered for the "t1" is loaded
3-Time Set Value: from the memory and the oven starts to function.
The set time value is read on the time indicator. When the temperature reaches the adjusted (set)
4-Combiner Rate: value, the time starts to count. The displayed time
The set combiner value is read on the combiner value decreases by one at the end of each minute.
rate indicator. The time mode button is pressed for When the time is reset, the machine loads the set
the other " t2 " and " t3 " modes. The operations value (as well as the temperature set value and
no. 2, 3 and 4 are repeated for each time mode. 5 combiner rate) entered for the " t2" mode and
seconds after the last pressed button, the machine continues to work according to these new values.
gets off the adjustment position. Once the "t2" and "t3" modes are processed, the
5-Fan Speed Adjustment: machine emits a sound warning and stops
The fan speed adjustment is done after having working. The time mode returns to "t1" in this
appeared all the adjusted values. The fan speed case.
adjustment is independent from the program. The DRY COOKING:
speed adjustment should be done before each Before giving the start, 100% convection (0%
operation according to the type of the product to steam) rate is selected through the combiner
be cooked. selection button. In this case only the heaters are
6-Operation: engaged. The fan starts to function automatically.
The start button is pressed. The oven starts to The fan can not be stopped when the heaters are
function as per the adjusted values. engaged. However, the speed adjustment can be
7-Control During Operation: changed. The time starts to count when the
Once the oven starts, the set values can not be temperature reaches the adjusted (set) value. The
changed. However, these can be seen for control set time value decreases by one at the end of each
purposes. The set time can be verified by pressing minute. If the oven door is opened when the time
on the time set button. The set temperature can be counts down, the machine emits a continuous
seen by pressing on the temperature set button. warning sound and the time count is stopped. The
warning stops when the door is closed and the
3.2.3 - Operating Principles time continues to count from where it has
MANUAL START: remained. If it is desired to feed steam to the oven
After having entered the temperature, time and during the cooking operation, " Manual Steam
combiner rates, the oven starts to function by Button " is pressed. As long as it is kept pressed,
pressing on the start/stop button. In such a case, steam is fed into the oven. When the time is reset,
the time mode is not operative. The adjusted a sound warning is emitted, the heaters and fan are
values appear on the related indicators. After stopped and the stop position is taken. If it is
13