20
www.electrolux.com
Problem and alarm code
Ratt ing/knocklng sounds
from inside the appliance.
The appliance tips the cir-
cuit-beaker.
Possible cause and solution
• The tableware IS not properly arranged in the baskets.
Refer to basket loading leaflet.
• Make sure that the spray arms can rotate free y.
The amperage is insufficient to supply simultaneously
all the appliances in use. Check the socket amperage
and the capac ty of the meter or turn off one of the ap-
pliances in use.
• Internal eectrica fault of the appl'ance. Contact an Au
thorised Service Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the apprance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Sen,'ice Centre.
For a arm codes not described in the
table, contact an Authorised Service
Centre.
12.1 The washing and drying results are not satisfactory
Problem
Poor washing results.
Poor drying results.
ihere are whitish streaks or
bluish layers on glasses and
dishes.
There are stains and dry wa-
ter drops on glasses and
dishes.
The dishes are wet.
Possible cause and solution
•
•
•
•
•
•
•
•
•
•
Refer to "Daily use", "Hints and tips" and basket
loading leaflet.
Use more intensive wash'ng programmes.
If you use multi-tablets, always switch on the option
Multitab.
Tableware has been left for too long nside a closed
appliance.
There is no rinse aid or the dosage of rinse a'd is not
enough. Set the fnse aid dispenser to a higher evel
P astic items may need to be towel dried.
We recommend to always use rinse aid, even in
combination with multi-tablets.
The re ease quantity of rinse aid is too much. Adjust
the rinse ad level to a lower level.
The quant ty of detergent s too much.
The re eased quantity of rinse aid is not sufficient.
Adjust the r nse aid eve to a higher eve.
The quality of the r'nse aid can be the cause.
The programme does not have a drying phase or
has a dry ng phase with low temperature.
The rinse aid dispenser IS empty.
The quality of the r nse aid can be the cause.
The quality of the mult• tablets can be the cause. Try
a different brand or activate the rinse aid dispenser
and use rinse a d and mult -tablets together.