4. Remove the front door by pulling it upwards to
release it from the ri ht and left hin es.
teps carried out during removing process
i
hould be performed in reverse order to install
e door. Do not forget to close the clips at th
hinge housing when reinstalling the door.
Removing the door inner glass
The inner glass panel of the oven door can be re-
moved for cleaning,
Open the oven door.
2
2
Frame
Plastic part
Pull towards yourself and remove the plastic part
installed to upper section of the front door.
2
3
The first step to regroup the door is reinstalling inner
glass panel (2).
As illustrated in figure, place the chamfered corner of
the glass panel so that it will rest in the chamfered
corner of the plastic slot.
Inner glass panel (2) must be installed into the plastic
slot close the innermost glass panel (1).
When installing the innermost glass panel (1), make
sure that the printed side of the panel faces towards
the inner glass panel.
It is important to seat lower corner of inner glass panel
into the lower plastic slot.
Push the plastic part towards the frame until you hear
a "click".
Replacin the oven lam
2
3
4
4123
Innermost glass panel
Inner glass panel
Outer glass panel
Plastic glass panel slat-Lower
i
As illustrated in figure, raise the innermost glass panel
(1) slightly in direction A and pull it out in direction B
Repeat the same procedure to remove the inner glass
panel (2).
DANGER:
Before replacing the oven lamp, make sure
hat the product is disconnected from mains
and cooled down in order to avoid the risk of
an electrical shock.
Hot surfaces may cause burns!
he oven lamp is a special electric light bulb
hat can resist up to 300 cc. See Technical
specifications, page 11 for details. Oven
lamps can be obtained from Authorised
Service Agents or technician with licence.
31 /EN