Maintenance and care
General information
Service life of the product will extend and the
ity of problems will decrease if the product is cleaned
atre ular inm'als.
Cleaning the oven
To clean the side wall
Remove pin (I) of the side rack by pulling it in the
direction of arrow with the side wall it is mounted
•
•
DANGER:
Disconnect the product from mains supply
efore starting maintenance and cleaning
works.
There is the risk of electric shock!
DANGER:
Allow the product to cool down before you
lean it.
Hot surfaces may cause burns!
Clean the product thoroughly after each use. In
this way it will be possible to remove cooking
residues more easily, thus avoiding these from
buming the next time the appliance is used.
No special Cleaning agents are required for
cleaning the product. Use warm water with
washing liquid, a soft cloth or sponge to clean
the product and wipe it with a dry cloth.
Always ensure any excess liquid is thoroughly
wiped off after cleaning and any spillage is im-
mediately wiped dry.
Do not use cleaning agents that contain acid or
chloride to clean the stainless or inox surfaces
and the handle. Use a soft cloth with a liquid de-
tergent (not abrasive) to wipe those parts clean,
2.
3.
4.
5.
6.
7.
Remove the side rack and side wall completely by
pulling it towards you.
Remove the side rack from the holes (2) on the
oven wall by pulling.
To clean the side rack and side wall, use warm
water with washing liquid, a soft cloth or sponge
to clean the product and wipe it with a dry cloth.
Place side rack by pulling to hdes (2) on the back
of side wall.
2
i
i
in attention toswee in one direction.
he surface might get damaged by some
etergents or cleaning materials.
o not use aggressive detergents, cleaning
powders/creams or any sharp objects during
cleaning.
Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass
since they can scratch the surface, which may
result in shatter'ng of the g ass.
o not use steam cleaners to clean the
ppliance as this may cause an electric shock.
i
you have the flexi telescopic feature of
our product; there is one hole on the
ack surf side wall. Place side rack by
Cleaning the control panel
Clean the control panel and knobs with a damp cloth
and wi e them d
o not remove the control buttons/knobs to
i
lean the control panel.
ontrol panel may get damaged!
pulling to hole.
Lock side rack to side wall by pulling pin (I) of
side rack in the direction of arrow.
Place side rack and side wall assembly to its place
by pulling pins (3) to holes on the back wall as
shown in figure.
29/EN