Operating the product
The machine will remain
silent in pause mode for
some time in order to
remove the water in the
machine and on the dishes
completely and to have the
water softener cleaned, and
then it will resume running in
d in mode.
Cancelling the programme
Press and hold the Programme
Selection / Programme Cancel keys
for 3 seconds. Release the key as the
Start indicator starts flashing.
Once you close the door of your
machine, draining is completed in 2
minutes
and the machine gives an audible
warning when it is completed.
There might be residues
I of detergent or rinse aid
in the machine and/or on
the pieces being washed
depending on the step
the programme you have
cancelled was in.
Salt indicator (S)
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on the
display of your machine.
Adjusting the water hardness
I level is explained in Water
Softenin S stem section.
42/51 EN
Rinse Aid indicator (96)
Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears
on the display of your machine.
End of programme
When the programme you
I have selected comes to an
end, an audible warning
signal will warn you to turn
off your machine. This
audible signal will warn you
with certain intervals before
it turns off.
End of Programme indicator will light
up when the washing programme is
over.
1.
2.
3.
4.
Open the door of the machine.
Press On/Off key to turn off your
machine.
Close the tap.
Unplug the machine from the
socket.
For energy saving, the
I machine is automatically
turned off following
the completion of the
programme or if the
ro ramme is not started.
Dishwasher / User's Manual