Preparation
3.
4.
After the empty washing cycle,
review the user manual and
readjust the water hardness level
so as to suit the water supply.
Make the appropriate rinse aid
settings.
Depending on the model,
i
salt indicator and/or rinse
aid indicator should be
enabled again if they are
disabled before.
Rinse aid
i
The rinse aid used in
dishwashers is a special
combination that aims to
increase drying efficiency
and prevent water or lime
stains on the washed items.
For this reason, care must
be paid to have rinse aid in
the rinse aid reservoir and
to use rinse aids produced
specially for dishwashers
only.
2.
3.
4.
Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid warning indicator
appears on the display of your
machine.
1. Open the lid of the rinse aid
reservoir by pulling the latch in the
direction of the arrow (B).
18/51 EN
Fill the reservoir until "MAX" level.
Turn the rinse aid amount
adjuster manually to a position
between 1 and 6 (C). If there are
stains on tableware items after
washing, level must be increased
and if there is a blue trace after
wiping them by hand, it must be
decreased. This is set to position 4
as factory default.
c
Close the lid of the reservoir by
pressing on it lightly.
After making sure that the
lid is closed, wipe clean
any spilled rinse aid outside
the reservoir. Rinse aid
that spilled accidentally will
cause foaming and it will
eventually decrease washing
erformance.
Dishwasher / User's Manual