High-pressure washer
INTRODUCTION
0760
• This tool has been designed for cleaning areas and
objects outside the house, vehicles and boats
This tool is intended tor domestic use only and is not
designed to operate with water from sources Other than a
watertap
This tool is not intended for professional use
Read this instruction manual carefully before use
and save it for future reference
Pay special attention to the safety instructions and
warnings; failure to follow these may result in
serious injury
Check whether the packaging contains all parts as
illustrated in drawing @
• When parts are missing or damaged, please contact your
dealer
TECHNICAL SPECIFICATIONS @
Working pressure (P)
Maximum working pressure (Pmax)
Inlet pressure
TOOL ELEMENTS
7 MPa
10 MPa
O- MPa
A
B
C
D
E
F
G
H
J
K
L
M
N
p
Q
R
S
T
Trigger lock
Trigger
Inlet connector
Water inlet
Water filter
Mains switch
Spraying nozzle
Detergent bottle
Detergent nozzle
Spray lance
Hand gun
Cleaning needle
Storage rail (screws not supplied)
Storage strap (2)
High-pressure hose
Water outlet
Ventilation slots
Connection for storage straps
SAFETY
GENERAL
Use the tool and its accessories in accordance with this
instruction manual and in the manner intended for the
tool; use Of the tool for operations, different from those
normal y expected to be performed by the tool, could
result in a hazardous situation
Never draw in solvent-containing liquids, undiluted
acids or solvents (e.g. petrol, paint thinners, heating
oil); these liquids produce a highly flammable, explosive
and toxic sprayed vapour and they also corrode the tool
components
Only use the tool when the ambient temperature is
between OOC and 400C
Start working only when tool and operating
equipment are in perfect condition and safe to
operate
Be aware Of the kickback forces that OCCUr when starting
the high-pressure washer; hold hand gun and spray
lance firmly and take a secure stance
Never clamp the trigger in position during operation
Never direct the water jet towards other people,
animals, live electrical equipment or the tool itself@
Never leave the tool unattended while the motor is
running
Do not operate the tool in potentially explosive locations
Always switch Off tool, disconnect plug from power
source, and ensure there is no water pressure in
tool and hand gun before adjusting, cleaning or
changing accessories
PERSONAL SAFETY
This tool is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack Of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
tool by a person responsible for their safety
Ensure that children do not play with the tool
Wear suitable protective clothing to protect against
splashing water
DO not use the tool with other persons in the vicinity
unless they wear protective clothing
Do not spray materials containing asbestos and other
materials which contain substances which are hazardous
to your health
Only clean tyres/tyre valves from a minimum distance of
30 cm to prevent damaging them (damaged vehicle tyres
may lead to fatal accidents)
Do not direct the water jet against yourself or others
in order to clean clothes or footwear
WATER SUPPLY
Only use the high-pressure hose and coupling
supplied with the tool
Replace a damaged high-pressure hose immediately
(with identical specifications)
Do not kink or drive a motor vehicle over the high-
pressure hose
DO not expose the high-pressure hose to sharp edges or
corners
Ensure that all connecting hoses have properly sealed
joints
Be aware that the sprayed water generated by the
tool is not drinkable
According to the applicable regulations, the tool must
never be used on the drinking water net without a system
separator @; use a suitable system separator as per
EN 12729 type BA
ELECTRICAL SAFETY
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool (tools with
a rating Of 230V or 240V can also be connected to a
220V supply)
Connect the tool via a fault current (Fl) circuit breaker
with a triggering current of 30 mA maximum
6
İlginizi çekebilecek Skil marka Yüksek Basınçlı Yıkama Makinesi ürünleri