Sinbo Sinbo SK-7353 Kettle
First Use of Kettle * Before using the kettle for the first time, fill it with only cold water and boil twice. 1. Fill the kettle with water. Do not overfill it. 2. Place the kettle on the base unit. 3. Power connection * Ensure that the voltage of the power supply the kettle will be connected is the same as the appliance voltage. Related information Is provided on the label on the base unit. * Plug the kettle in a 2200240V, 50/60Hz socket mounted properly. Move the onooff button to lower position. The button light means that water boils when it comes on. 4. The kettle is automatically turned off after boiling. Disconnect the kettle from power socket. Do not open the cover when pouring the water. In case the kettle is overfilled, boiling water may splash out of it. The kettle should be used only with the provided base unit. 5. This appliance is intended for domestic use or similar uses specified as follows: shops, offices or personnel lounges in such workplaces; Dfarm houses; by customers in hotels, motels or other accommodation units; Ofacilities supplying rooms and breakfast service. DURING TRANSPORTATION AND HANDLING • Do not drop the product, • Protect from impacts, • Ensure it doesn't get crushed or squeezed, • Observe the marks on the packaging, Unplug the power cord when you don't use the appliance. CLEANING AND MAINTENANCE Disconnect the kettle from power socket before cleaning! Clean the outer side of the kettle using a wet cloth and without using any cleaning agent if required. The filter is builtßn and can be cleaned easily. DISPOSE ENVIRONMENT FRIENDLY You can help the environment be protected! Please follow the local regulations: Deliver the electrical equipment not running to a suitable waste collection centre.