OVERVIEW OF THE APPLIANCE
1. cover
2.
Handle
3. ON/OFF Switch
4. Wireless base unit
5. Water level indicator
6. Main body
7. Pouring end
PLACEMENT OF FILTER
1. Open the cover.
2. Insert the filter into the pouring end and push it until it locks.
3. Press the filter down to the end of the channel and close the cover once you are sure
it is placed.
Never leave the filter in the kettle until it is in place. Never remove the filter when there
is hot water in the kettle.
WATER FILLING
1. Separate the kettle from the base unit.
2. You can fill the kettle with water through pouring end or by opening the cover.
3. In order to prevent your kettle to operate dehydrated, it is not recommended to be
operated with less than 1 litre.
4. Do not fill your kettle with water exceeding the maximum level. If it is overfilled, the
water may overflow during boiling.
OPERATION
1. After filling with water, place the kettle on the base unit.
2. Plug in the appliance and press the On/off switch. Appliance will begin to operate, and
the indicator light will come on.
TURNING OFF
When the water is at boiling point. the kettle will switch off automatically and the indicator
light will go off.
NOTE: this device includes a safety system, if the device is operated accidentally without
any water in it or if the water boils out, the heating element will be turned off, In this
case, before filling in water again, allow the appliance to cool off completely.
REOOPERATING
After the appliance Is turned off automatically, walt for It to cool off for 15 to 20 seconds
and operate it again.