Kullanım Kılavuzları
YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Shizuoka 438-8501, Japan 9.5 Audible warning device(s) 9.5.1 Summary description of device(s) used and their purpose: Horn 9.5.2 Make(s): Nikko 9.5.3 Type(s): HF-12 9.5.4 Type-approval mark: II E13 000114 9.5.5 Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: Fig. 9.5.6 9.5.6 Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: Fig. 9.5.6 9.6 Location of rear registration plate (indicate variants where necessary; drawings may be used as appropriate): Fig. 9.6 9.6.1 Inclination of plane in relation to the vertical: 26° B INFORMATION RELATING SOLELY TO TWO-WHEEL MOPEDS AND MOTORCYCLES 1 Equipment 1.1 Rear-view mirror(s) (please provide the following information for each rear-view mirror) 1.1.1 Make: KEN SEAN 1.1.2 Component type-approval mark: L E9 00.1003 1.1.3 Variant: Type: KEN SEAN 003 Variant: KEN SEAN 003L, 003R 1.1.4 Drawing(s) showing the location of the rear-view mirror(s) in relation to the structure of the vehicle: Fig. 1.1.4 1.1.5 Precise information concerning the type of attachment, including that part of the vehicle structure to which the rear-view mirror is attached: Fig. 1.1.4 1.2 Stand 1.2.1 Type: central and/or side Central and side 1.2.2 Drawing showing the location of the stand(s) in relation to the structure of the vehicle: Fig. 1.2.2(1~2/2) 1.3 Attachments for motorcycle sidecars (where applicable): N.A. 1.3.1 Photographs and/or drawings showing the location and the construction: N.A. 1.4 Hand-hold for a passenger 1.4.1 Type: strap and/or handle: Handle 1.4.2 Photographs and/or drawings showing the location: Fig. 1.4.2 1.5 For mopeds fitted with pedals and, if Directive 97/24/EC, Chapter 3, Annex I, point 3.5. applies description of the measures taken in order to ensure safety: N.A. 1.6 Design and position of the label referred to in Directive 97/24/EC, Chapter 7: N.A. D. ADDITIONAL INFORMATION f. Drawings of cross-section of engine: Fig. REF-1, REF-2 g. Drawing of seat position: Fig. REF-3(1~2/2) * h. Drawing of wiring diagram: Fig. REF-4 *: Changing points by Extension