Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, “Input Selection” section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio, use a component audio cable as illustrated
below. When the connection is made, switch to YPbPr source. See, “Input selection” section.
• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown
below.
Component Component
audio video
REAR VIEW inputs inputs Scart sockets HDMI
Input
SCART
cable
HDMI
cable
Component
video
cable
Component
audio
cable
Note: These three methods of connection perform the same function but in different levels of
quality. It is not necessary to connect by all three methods.
English - 49 -
02-ENG-32800W-1110 UK-32INCH-17MB12-(1 49HDMI-VIRTUAL DOLBY-S-SVHS-BASIC PIP-VGA)-501487C2p65
Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.