First Time Installation
When the TV set is operated for the first time, the
following menu screen will be displayed:
Select your Country, Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
OK or RED button to continue. To cancel, press the
BLUE button.
The following menu will be displayed during the
automatic tuning:
After APS is finalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
If you do not accept the locations and/or the programme
names, you can change them via the program table.
Do not turn off the TV while initializing time
installation.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
•
Press “AV/SOURCE” button on your remote control
for directly changing sources.
or
•
Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“ ” button to highlight an input and press “ ” button
to select.
Note: You can mark desired source options by pressing
the OK button. Therefore, when “AV/SOURCE” button is
pressed, only the marked source options will be available
(except for the TV source).
Note : YPbPr mode can be use only when you connect a
device that has a YPbPr output through the PC input with
YPbPr to PC cable (YPbPr cable is not supplied).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons of the TV
Main menu OSD cannot be displayed via control
buttons. “+/-” buttons will function as volume up/down
as default. Even if you set other functions for these
buttons, “+/-” buttons will perform as default after a
short while.
Volume Setting
•
Press “+/-” buttons to increase or decrease volume,
so a volume level scale (slider) will be displayed
on the screen.
Programme Selection
•
Press P/V/AV button once and then use “+/-” buttons
to select the next or previous programme.
AV Mode
•
Hold the “P/V/AV” button, source OSD will be
displayed.
•
Use “+/-” buttons to select the desired source.
Operation with the Remote Control
•
The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
•
Functions of the menu system are described in the
following sections.
Volume Setting
•
Press “
” button to increase the volume. Press
“
” button to decrease the volume. A volume
level scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
•
Press “P/CH ” button to select the previous
programme.
English - 33 -
________.i
02_[GB]_MB45_1059UK_ANALOG_BRONZE11_22875W_10066461_50163639.indd 33
..
03.03.2010
::
15:53:59