the boiling process at any time by gently Refitting is the reverse of removal.
lifting the On/Off switch. Ensure that the filter lugs are located
WARNING! correctly.
Never open the lid if steam is coming
from the spout. Descaling
Descale your kettle at least twice a year
Maintenance using a proprietary descaling solution
(follow the manufacturers instructions).
Cleaning If you descale your kettle regularly, less
Disconnect from the mains supply before descaling solution will be required.
cleaning. Use a damp cloth to clean the Alternatively, half fill the kettle with water,
exterior of the kettle. add the juice of a lemon then boil and
Never use harsh chemicals or abrasive allow to stand for 15 minutes.
cleaning agents as these may damage Boil the solution and allow to stand again
the finish of your kettle. for 15 minutes.
Finally, boil once more then rinse
Cleaning the Filter thoroughly before use.
The filter is located inside the kettle behind You may descale the filter as well, if it
the spout. has become clogged.
Remove it by carefully pushing down on
the top of the filter. Rinse in warm water Technical Specification
and gently remove any scale with a soft Power source: 230 Volts AC 50Hz
brush. Power Consumption 2200W
10