Unimep VISION L SERİSİ 1-2-4-6-8-10 TABANCALI, 1-2-3-4-5 ÜRÜNLÜ, LCD EKRANLI, LİTRE-PARA YAZAR, DALGIÇ/EMİŞLİ POMPALI Akaryakıt Dağıtım Pompaları
OBSERVING NON RESETTABLE TOTAL FOR AMOUNT ( P-N92 )
This is the non re-settable total amount with 9 integer digits and two rational digits.
For observing total amount belonging to nozzle number ‘N’ from left;
Press ‘0’, ‘N’ (1, 2,3,4), ‘9’, ‘2’ keys and see ‘P-N92’. N is the number you entered as nozzle
number from left. If your dispenser has single nozzle, no need to enter nozzle number and only enter
program number as 92.
EXAMPLE : Amount total for nozzle number 3 can be observed, pressing ‘0’,’3’,’9’,’2’,’Enter’ as shown.
3 4 5 6 7 8 9. 0 1
P 1 2
P - 3 9 2
Amount total = 123, 456,789,01
Quit from program pressing ‘CLR’ key.
OBSERVING NON RESETTABLE TOTAL VOLUME DELIVERED FROM NOZZLE ‘N’ ( P-N93 )
This is the non re-settable total volume with 8 integer digits and two rational digits.
For observing total volume belonging to nozzle number ‘N’ from left;
Press ‘0’, ‘N’ (1, 2,3,4), ‘9’, ‘3’ keys and see ‘P-N93’. N is the number you entered as nozzle
number from left. If your dispenser has single nozzle, no need to enter nozzle number and only enter
program number as 93.
EXAMPLE : Volume total for nozzle number 3 can be observed, pressing ‘0’,’3’,’9’,’3’,’Enter’ as
shown.
L 1 2
3 4 5 6 7 8.9 0
P - 3 9 3
Volume total for nozzle 3 = 12 345 678 Lt, 90 cl .
Integer part of this total must be as same as electromechanical totalizer for this nozzle.
Quit from program pressing ‘CLR’ key.
OBSERVING SHIFT TOTAL FOR AMOUNT DELIVERED FROM NOZZLE NUMBER ‘N’ ( P-N94 )
This is the re-settable total (shift total) amount of 9 digits with 7 integer digits and two rational
digits. The total count is equal to total of amount from the last reset at the beginning of this shift.
For observing total amount belonging to nozzle number ‘N’ from left;
Press ‘0’, ‘N’ (1, 2,3,4), ‘9’, ‘4’ keys and see ‘P-N94’. N is the number you entered as nozzle
number from left. If your dispenser has single nozzle, no need to enter nozzle number and only enter
program number as 94.
49