Unimep ORION SERİSİ 1-2-4-6-8-10 TABANCALI ,1-2-3-4-5 ÜRÜNLÜ, LCD EKRANLI, LİTRE-PARA YAZAR , DALGIÇ/ EMİŞLİ POMPALI Akaryakıt Dağıtım Pompaları

EXAMPLE : 1.500. 00 $ 1.5 0 0. 0 0 preset - P - Press ‘Enter’, ’1’ , ’5 ’ , ’0’ , ’0’ keys in the order and see above display. • Enter preset amount by observing display carefully. • Remove nozzle if value, you see on display is true. Else, press ‘CLR’ and re-enter correct value. • Motor and solenoids starts automatically and delivery begins as you press nozzle trigger. • Delivery speed will be adjusted by CPU itself and stops at the exact value you have entered. 2. ENTERING VOLUME PRESET : Volume preset is entered by using numeric keys only. Follow the procedure: • Be sure that nozzle is in its place before entering preset. • Press ‘Enter’ key twice and see ‘-L-‘ symbol on display. • Use numeric keys for entering the integer part of volume preset as you wish. Rational part of value is always .00. EXAMP : 125 Lt preset - L - 1 2 5. 0 0 Press ‘Ente’ ,’Enter ’, ’1 ’, ’2 ’, ’5 ’keys and see 125.00 on the middle part of display. • Remove nozzle and start delivery.That is all. IMPORTANT NOTES ABOUT PRESET DELIVERIES : • Do not press ‘Enter’ after entering preset value and before removing nozzle. • If you remove nozzle for the product that is not the one,your customer want,then place that nozzle but re- enter preset before removing correct nozzle.(for multiproduct dispensers) • If you place nozzle, before the value you entered,this ignores preset and sale is finished at the value you really delivered. • Observe the display carefully when entering preset.(especially control the number of zeros carefully) • You can not change preset value after nozzle removing and also at any time of delivery.Preset entering is not allowed while delivery is going on. • If you enter a preset value and remove nozzle.But, if site controller sends an amound preset message at the same time,then CPU makes a comparing between two preset values and accepts the smaller one. II. OBSERVING THE DELIVERY SPEED (as Lt/min): You can observe the flowing rate of delivery if you press ‘1’, while display is counting.Price screen will turn to show you the delivery speed as Lt/min. Pressing ‘CLR’ key ignores this function and display turns to show price per liter again. 43