Unimep COSMIC SERİSİ 1-2-4-6-8-10 TABANCALI, 1-2-3-4-5 ÜRÜNLÜ, LCD EKRANLI, LİTRE-PARA YAZAR, DALGIÇ/EMİŞLİ POMPALI Akaryakıt Dağıtım Pompaları
Not 1: no autority
Not 2: users password necessary to achieve autority to enter this program
Not 3: only for service technicians use
HOW TO USE PROGRAMS :
RECALLING INFORMATION OF RECENT DELIVERIES ( P-N00...P-N09 ):
When a delivery is finished,all information including amount,volume and price of delivery
is saved in a separate memory location to provide recalling soon. You can re observe previous
sales’ display data when you want.
• Press ‘0’,and see ‘P-000’ or ‘P—00’.
• Enter nozzle number from left and 01 to 09 according to oldness of sale then press
‘Enter’
• Display will show you the data belonging to that delivery for 4 seconds and turns to
original form.
EXAMPLE : You want to recall display data for the delivery made from nozzle number 4 and
delivery is 2 th preceding from the last.
Press ‘0’, ‘4’, ‘0’, ‘2’ in correct order and see ‘P-402’. Press ‘Enter’.You will see the information
for this delivery,including its amount,volume and unit price for 4 seconds with a continous beeep
sound.Then display automatically turns to its original form of showing the last delivery information.
DISPLAY TESTING PROGRAM ( P-055 ):
As you know that display unit is a seven segment type LCD and current ways of each segment
is separate.If there is a problem on the current way of a segment then,this segment will not work.
For example, if segment ‘a’ of a digit is defective then, a digit ‘7’ will be seen as ‘1’.
You can control whether such a problem is present or not on a digit.
Press ‘0’,’5’,’5’ in correct order and see ‘P-55’ on the screen. Now pressing ‘Enter’ you will see a
display counting from 0 to 9 that numbers are the same at all digit positions.
Each form will be displayed for 2 seconds and counts up to next number. One can easily see a
fault occur on a segment position of a digit with careful observation.
Display will turn to original form after number 9 is displayed.
0 0 0 0 0 0 0. 0 0 0 I I I I I I I. I I I
0 0 0 0 0 0. 0 0 0 I I I I I I. I I I
.
0 0 0 0 0. 0 0 0 I I I I I. I I I
OBSERVING THE DATE OF MANUFACTURE AND FIRMWARE OF CPU SOFTWARE ( P-070 ):
This data is entered by manufacturer in production line and you can see entering this program.
Press ‘0’, ‘7’, ‘0’ keys in order and see ‘P-070’.Press ‘Enter’ and see data as in example shown
below.
EXAMPLE : 0 5 0 6 2 0 0 3
P S r.0 0 1
Date of manufacture : 5th, June 2003
Firmware : 001
46