IMPORTANT SAFEGUARDS
Operation and maintenance
Remove all packaging of the device.
Check if the voltage Of the appliance corresponds to the main voltage Of your home.
Rated voltage . AC220-240V 50Hz
UK
Do not use the device in the bathroom or near a sink filled with water. If the device has fallen
into the water first pull the plug from the outlet.
Use
Turn the foldinh handle (No. 1) down until it clicks.
Use the slide switch wind speed (No. 2) to set the desired position.
2
Normal speed
Fast speed
Cleaning of the device
Before cleaning remove the socket from the outlet. You can clean the hairdryer with a damp
cloth for any hair or dirt particles on the grid and the back. Do not use alcohol to clean the
device. Never immerse the device into water or another liquid. Make sure the cleaned parts dry
thoroughly.
7
•
•
•
•
•
•
•
•
Read all instructions before use.
Do not touch hot surfaces. Use handles or knobs.
TO protect against electric shock, do not immerse cord, plug or appliance in water or
any Other liquid.
Unplug from outlet when not in use and before cleaning. Allow the device to cool
before putting on or taking off parts. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions, or has been damaged in any
manner.
The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries and invalidate any warranty you may have.
Do not use outdoors, or on or near direct heat sources
DO not let cord hang over edge Of table or counter, or touch hot surfaces or come
into contact with the hot parts or allow the product to be situated underneath or close
to curtains, window coverings etc.
This appliance is for household use only and only for the purpose it is made for.
The appliance must be placed on a stable, level surface.
This appliance is an attended appliance, and as such should never be left ON or
whilst hot without adult supervision.
This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This device is not intended for use with an external timer or a remote control system.
Note: TO avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.
Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.
A damaged cord or plug must be replaced by an authorized technician to avoid a
hazard. Do not repair the device yourself.
Using an extension cord or something similar is not allowed.
For additional protection, we advise you to install a residual current device (RCD) in
the electrical circuit that supplies the bathroom. This RCD must have a rated
residual operating current not higher than 30mA. Ask your installer for advice.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
8