The movement is transmitted to conical gear of second pulley by a metal bar dimens oned as
1070mm,25 mm. This metal bar is beared a three point over it. The conical gears are settled reverse sıded on
that metal bar. So there is designed a grass barrel on the middle of the systems.
There are spring pressed cutter on each of disks. Both two side of cutter has cut featured.The cutter can
be us efor others whwn it wears because of disks revolve opposite side.The cutters can be changecl easily with a
special spanner without disks pul out.
The working safety of pulleyed mower is kept with spring pressed safety system.Also there is a spring
safety coupling in main axlewhich movement transmitted from tractor pivot axle.
06 - TAŞMA VE SEVKIYAT ESNASINDA DIKKAT EDILECEK HUSUSLAR
.Makine ilgili nakliye araçlarına yükrenirken:südünme ve sert darbelere karşı korunmalıck.
,Nakliye aracına yüklenen makinelerin nakliyesi sırasında çarpma ve sürtünmelere karşı koruması için
gerekli tespit ve sabitleme malzemeleri kullanılmalıdır.
06- THE MATTERS BEING CAREFUL DURING TRANSPORT
.The machine must be kept from hard blows and frictions during transport.
.The machine must be fix toflour to not move during transport
7