5. Put on the shaft protection chain to side lifting bar, so shaft would not be
turn because of protection.
6. Get the machine parallel to earth before first start-up.
7. There must not be any living creature between tractor and machine to start-
up machine.
8. Turn the machine to side after machine is parallel to earth.
9. Do not over revolution as 540 rpm as stated in operating instructions.
10. Be careful that cutters are true settled after changing operation.
11. Use original cutters if olds are not run well.
12. Do not approach to machine without stopping the tractor.
13. Keep the machine transfer position when you do not use it.
14. Do not allow the persons to approach to machine, because the machine can
throw some Stones or hard things to people.
15. Before cutting operations, the field or area must be cleaned from Stones ör
hard things. These can damage the machine.
16. Take care when you work in path or stony roads.
17. The modifications and/or alterations made by the client will be on account
and the responsibility of the client. The manufacturer to be exonerated from liability.
09 BAKIM TALİMATI (MAINTENANCEINSTRUCTIONS)
1-) GÜNLÜK BAKIM
a. Makina ile kesme işlemi bittiği zaman makine üzerinde bulunan tüm
gresörlüklere gres yağı basınız.
b. Kesme işlemi bittikten sonra makinenin kesme bıçaklarını, kayışlarını
kontrol ediniz. Herhangi bir uygunsuzluk tespit ederseniz hemen gerekli işlemleri
yapınız.
16