The movement is transmitted to conical gear of second pulley by a metal bar
dimensioned as 1070mm,25 mm. This metal bar is beared a three point over it. The
conical gears are settled reverse sided on that metal bar. Sothere is designed a grass
barrel on the middle of the systems.
There are spring pressed cutter on each of disks.Both two side of cutter has cut
featured. The cutter can be us efor others whwn it wears because of disks revolve
opposite side. The cutters can be changed easily with a special spanner without disks
pul out.
The working safety of pulleyed mower is kept with spring pressed safety
system. Also there is a spring safety coupling in main axle which movement transmitted
from tractor pivot axle.
06 - TAŞIMA VE SEVKİYAT ESNASINDA DİKKAT EDİLECEK
HUSUSLAR
Makine ilgili nakliye araçlarına yüklenirken;sürtünme ve sert darbelere karşı
korunmalıdır. Nakliye aracına yüklenen makinelerin nakliyesi sırasında çarpma ve
sürtünmelere karşı koruması için gerekli tespit ve sabitleme malzemeleri
kullanılmalıdır.
06 – THE MATTERS BEING CAREFUL DURING TRANSPORT
The machine must be kept from hard blows and frictions during transport. The
machine must be fix to flour to not move during transport
10