en
Congratulations on purchasing this
Siemens appliance. You have acquired a
high-quality product that will bring you a
lot of enjoyment.
These operating instructions describe a
hairdryer with accessories.
Controls and accessories
1 Temperature toggle switch SSS
— Setting 1 = low
— Setting 2 = medium
— Setting 3 = high
2 Fan toggle switch
— Setting O = off
— Setting 1 = gentle
— Setting 2 = strong
3 Lockable Cool button *
4 Air inlet grill
5 Styling nozzle
6 Hanging eyelet
Use
The blow and temperature settings can be
freely combined.
General
• Never cover the blower or air inlet.
Make sure the air inlet is free of lint and
hair.
The hairdryer will switch off automatically
if it overheats due to the air inlet being
covered. It will switch back on automati-
cally after a few minutes.
Important: Be sure to unplug the appliance
and wait a few minutes until it has cooled
down. It can then be used as before.
To pre-dry wet hair, select the higher
setting 2. Hold the appliance about 10 cm
away from your head.
10
Cool button *
The Cool function is ideal for ,setting' the
hair after drying. It fixes the individual hair
sections with the cool airflow.
Press the Cool button * to activate the
cooling function in any setting.
Press the Cool button * again to switch off
the cooling function.
Styling nozzle
The styling nozzle 5 is specially designed
for drying and styling sections Of hair.
Attach the styling nozzle 5 to
the appliance. Make sure it
clicks into place. The nozzle
can be turned as required.
Use
• Set the fan and temperature to a higher
setting.
• Direct the air stream right onto the section
of hair you want to style.
To fix the hair, switch on the Cool
button * and repeat the process.
Important: The nozzle should never actually
touch the hair.
Warning! The styling nozzle 5 can become
hot. Allow it to cool down before detaching.