Manual store
This menu is used to store the programmes one
at a time.
O Press the (O key.
O With the @ key, select Manual Store and
press O. use the keys to select a
setting and the keys to adjust. :
Manual Store
S stem
• Search
program No.
Fine Tune
• Store
Euro
System: select Europe (automatic detection*) or
West Europe (BG standard), East Europe (DK
Other settings in the menu
O Press the €1 key.
@ use the keys to select a setting and the
00 to
Bri fitness
Brightness
Colour
Contrast
Sharpness
Balance
Rotation
Auto Store
Manual Store
• Brightness: this changes picture brilliance.
Other functions
standard), UK (l standard) or France (LL' standard).
* Except for France (LL' standard), you must select
choice France.
Search: press O.The search starts. Once a
programme is found, the scanning stops. Go to
the next Step. If you know the frequency Of the
required programme, this can be entered directly
using the@to @ keys. If no programme is found,
see Tips chapter Gt the end of the instruction for use.
Program No.: enter the required number with
the or@to @ keys.
Fine Tune: if the reception is not satisfactory,
adjust using the keys.
Store: press O. The program is stored.
Repeat Steps to for each programme to store.
To quit the menus, press
• Colour: this changes the intensity Of the colour
• Contrast: this changes the difference between
the light and dark tones.
• Sharpness: this changes the picture definition.
• Balance : this balances the sound on the left and
right speakers.
• Rotation (f ovoiloble) : adjusts the angle of the picture.
• Auto Store: to start automatic search for all
programmes available in your region. Then, you
need to use the Manual Store menu to
renumber the programmes (see p. 1).
To quit or interrupt the search, press O.
TO quit the menus, press @
Connecting peripheral equipment
Use the euroconnector socket located at the back of the set or the front
AV connections (when available). Certain versions are equipped with
2 euroconnectors EXTI and EXT2.T0 select connected equipment, press
several times the key.
Most equipment (decoder, VCR) corries out the switching itsel[.
Headphones socket (only ovailob/e on certain versions)
When headphones are connected, the sound on the TV set will be cut.
The keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
Amplifier (only available on certain versions)
TO connect to a hi-fi system, use an audio connection cable and connect
the "L" and "R" outputs on the TV set to the "AUDIO IN" "L" and "R"
input on your hi-fi amplifier.
The keys on the TV set
TheTV set has 4 keys :VOLUME - + Z +) and PROGRAM - + P +).
To access or exit the menus, press simultaneously the Z - and Z +
keys. Then use the - P + and - Z + keys to select and adjust.
3