EC type-approval number: e4*2007/46*0165*01
0.8. Name(s) and address(es) of assembly
plant(s) :GENERAL MOTORS ESPANA S.L.
Apartado de Correos 375
E-50080 Zaragoza
Spain
0.9. Name and address of the manufacturer’s
representative (if any) : N/A
SECTION II
The undersigned hereby certifies the accuracy of the manufacturer’s description in the attached
information document of the vehicle(s) described above ((a) sample(s) having been selected by the
EC type-approval authority and submitted by the manufacturer as prototype(s) of the vehicle type)
and that the attached test results are applicable to the vehicle type.
1. For complete and completed vehicles/variants (1):
The vehicle type meets/does not meet (1) the technical requirements of all the relevant
regulatory acts as prescribed in Annex IV and Annex XI (1)(4) to Directive 2007/46/EC.
2. For incomplete vehicles/variants (1): N/A
The vehicle type meets/does not meet (1) the technical requirements of the regulatory acts
listed in the table on side 2.
3. The approval is granted/refused/withdrawn (1).
4. The approval is granted in accordance with Article 20 and the validity of the approval is
thus limited to dd/mm/yy.
Place : Zoetermeer
Date : 6 August 2010
Signature :
Attachments: - Information package.
- Test results (see Annex VIII).
- Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign
certificates of conformity and a statement of their position in the company.
(1) Delete where not applicable.
(2) If not available at the time of granting the type-approval, this item shall be completed at the latest when the vehicle is introduced on the
market.
(3) As defined in Annex II.A.
(4) See Side 2.
WVTA-annexVI.A-vehicle-basic 2007.46-79.2009 v1.00 Page 2 of 3