STP 120
This section describes the adjustments that only can be
Service setup carried out by an Authorised Technical Service Centre.
CAUTION
CX~ These values should not be modified by the operator or
user as other operating values of there processor could
be affected. These modifications should only be made
by trained technicians from an Authorised Service
Centre.
Access the Technical Service Setup menu by successively
pressing the keys STOP, ALARM and TIMER within a
maximum interval of 1 second.
1.TEMIIEPATYPE MENY Options Default Comments
value
1.1 HlI'ETEPEEIE 0.1 to 2 0.1 °C Establishes the connection/disconnection range
above and below the assigned temperature
1.2 MA . TEMIIEPATYPE 50 to 70 70 °C Temperature limits that can be selected by the
1.3 MIN. TEMIIEPATYPE 50 to 70 50 °C user from the SETUP MENU
1.4 IIAPAc~. AXTISE Y/N Y Enables keeping the paraffin baths hot during
S~ITH TIMEP delayed start.
2.c~AN (refer to the diagram below)
2.1 OIIEPATINr TIME 0000 to 9999 180 Time in seconds that the fan is connected when
starting the processor
2.2 ON TIME 0000 to 9999 120 Time that the fan is operating
2.3 Oc~c~ TIME 0000 to 9999 600 Pause between fan operating periods
3.MOTOP ETEII BlI' ETEII
3.1 ETIPPINr PATE 1 005 to 250 080 Speed in rpm for stirring 1
3.2 6titpptvy patis 2 005 to 250 080 Speed in rpm for stirring 2
3.3 xsvtipt~vys 6~ssS 005 to 250 180 Speed en rpm for the centrifugation
4.OIITIONE
4.1 EHAKE ENABAE Y/N Y Enables or disables the option of activating
vertical SHAKE
Diagram showing fan operation
Fan:
start on
off
T2.1 T2.3 T2.2 T2.3 Time
387716 - Türkçe - 44