Do not use the instrument if think it is damaged Or
notice anything unusual.
Never open the instrument.
• A basic physiologica' effect called vasoconstriction can
occur in the early stages offever, resulting in a cool skin
effect The recorded temperature using this thermom-
eter can, therefore, be unusually
• If the measurement result is not consistentwith the
patients finding or unusually law. repeat the measure-
ment every 15 minutes or double check the result by
another core body ten-werature measurement.
• This instrument comprises sensitive components and
must be treated with caution, Observe the storage and
operating conditions described in the "Technical Speci•
ficationso section!
• Ensure that chidren do not use the instrument unsuper-
vised; some parts are small enough to be swallowed.
. protectitfronv
• extreme temperatures
hpact and dropping
. contamination and dust
• direct sunlight
• heat and cold
• If the instrument is not going to be usedfor a prolonged
period the battenes should be remcved_
4
WARNING: use of this instrument is not intended
as a substitute for consultation with your physi-
cian. This instrument is NOT waterproof, so never
immerse in liqui(fr
3. How this Thermometer measures Temperature
This thermometer measures infrared energy radiated from
the forehead as as objects, This energy is collected
through the lens and converted to a temperature value,
Temperature readings obtained by scanning above the
eyebrow area V/ill provide the greatest accuracy,
4. Control Displays and Symbols
• All segments displayed@: Press the ON/OFF button
(b) to turn on the unit all segments will be shown for
2 seconds.
Memory The last reading will automatically be
on the display for 2 seconds.
Ready for measurement When the unit is ready for
measurement, the or 'con will keep flashing
'"tile the mode icon (body or object) will be displayed.
• Measurement complete U: The reading will be shown
On thedisplay@With the Or icon and the mode
icon steady, The urit is ready for the neKt measurementas
soon as the Or «OF* icon is flashing again
• Low battery indication g: When the unit is turned on,
the battery icon Will keep flashing to remind the user to
replace the battery
5. Changing between Body and Object Mode
For changing from body to object mode, slide the mode
switch (i) at the side of the thermometer downwards. For
switching back to body mode, slide the switch up again,
6. Directions for Use
Measuring in Body Mode
1. Press the OWOFF button@The display@is acti-
vated to show all segments for 2 seconds,
2, The last measurement reading wil automatically be
shown on the display for 2 seconds wit the icon
3, When the or «OF» icon is flashing, a beep sound is
heard and the thermometer is ready for measurement
4, Aim the thermometer at the center of the forehead
With a distance of no more than 5 cm. If the forehead
is covered With hair, sweat or dirt, please remove the
Obstacle beforehand to improve the reading accuracy.
microlife